| Quality Commitment | Inspection One By One, With A Pass Rate Of 100% (supporting Attached Inspection Reports) |
|---|---|
| Packaging | Carton, Wooden Box, Custom Packaging |
| Model | HS-030-702,8101-06172 |
| Accessory Type | New Energy Vehicle |
| International Certification | CE/ISO 9001/DOT |
| Design | Centrifugal Pump Impeller |
|---|---|
| Control | Intelligent ECU |
| Temperature Resistance Range | - 40°C- 120°C |
| Withstand Voltage | ≥1.2MPa |
| Import And Export Caliber | Φ38mm |
| Genuine OE Part Number | 4891252, Authentic -engineered Water Pump, Traceable Via Official Verification System |
|---|---|
| High-Performance Cooling | Max Flow Rate 120L/min, Optimized Impeller Design Enhances Heat Dissipation Efficiency By 30% |
| Anti-Cavitation Technology | Special Impeller Blade Design Prevents Air Bubble Formation, Ensuring Stable Water Flow |
| Maintenance-Free | Sealed Bearing & Pre-filled Lubricant, No Periodic Maintenance Needed Under Normal Use |
| Operating Pressure | Rated Working Pressure 150kPa, Peak Pressure Up To 200kPa, Stable Under Extreme Loads |
| Quality Commitment | Inspection One By One, With A Pass Rate Of 100% |
|---|---|
| Packaging | Carton, Wooden Box, Custom Packaging |
| B10 Life | Have A B10 Life Of 5000 Hours. |
| Waterproof Level | Reach IP67 Waterproof Rating. |
| Speed Range | Between 2000 - 4000 Rpm. |
| System Linkage | Works In Conjunction With The Thermostat (opening Temperature 82℃) |
|---|---|
| Temperature Adaptation | Works In The Full Temperature Range From -40℃ To 120℃ |
| Impact Vibration | Can Withstand An Acceleration Impact Of 20g |
| Sealing Technology | Adopt Cartridge Mechanical Seal |
| Impeller Optimization | Backward Centrifugal Impeller |
| Temperature Range | -40℃ To 120℃ Full Temperature Range Operation |
|---|---|
| System Adaptation | Compatible With 24V Vehicle Electrical Systems |
| Traffic Performance | The Maximum Flow Rate Can Reach 200L/min |
| Cavitation Resistance | Net Positive Suction Head (NPSH) ≤ 2.5m |
| Shell Material | ADC12 Die-cast Aluminum Alloy Shell |
| Control | Intelligent Temperature Control Start And Stop |
|---|---|
| Material | Aluminum Alloy Lightweight Shell |
| Safety | Overload Protection Mechanism |
| Protection | IP66 Dustproof And Waterproof |
| Mute | ≤ 60dB Low Noise Operation |
| Power | Low Energy Consumption |
|---|---|
| Heating | Rapid Temperature Rise |
| Shell | Corrosion Resistance |
| Maintenance | Maintenance-free |
| Movement | All Copper Material |
| Vane-type Hydraulic Pump | Efficient And Stable, With Low Noise And Long Service Life |
|---|---|
| Electric Drive | Powered By The Vehicle's High-voltage Battery |
| Motor Interface | High-voltage Waterproof Connector |
| Motor Speed | 3000-6000rpm |
| Original Factory Part Number | 2121-00041 |
| Packaging | Carton, Wooden Box, Custom Packaging |
|---|---|
| Applicable Scenario | Warm Water Pump - Variable Diameter |
| Enhanced Layer | High-strength Fiber Woven Mesh |
| Accessory Type | Accessories For Liquid Heaters |
| Antistatic Design | Surface Resistance ≤10^9Ω |