| Quality Commitment: | Inspection One By One, With A Pass Rate Of 100% (supporting Attached Inspection Reports) |
|---|---|
| Packaging: | Carton, Wooden Box, Custom Packaging |
| Model: | AVi168SP3003.3701-02195 |
| Quality Commitment: | Inspection One By One, With A Pass Rate Of 100% (supporting Attached Inspection Reports) |
|---|---|
| Packaging: | Carton, Wooden Box, Custom Packaging |
| Model: | HS-030-702,8101-06172 |
| Packaging: | Carton, Wooden Box, Custom Packaging |
|---|---|
| Structural Design: | Precision Gear And Rack Transmission |
| Lubrication Method: | Long-term Grease Lubrication |
| Advantage: | Durable, Energy-saving And Environmentally Friendly, Low Noise And High Efficiency |
|---|---|
| Applicable Scenario: | Automobile Cooling, Industrial Ventilation |
| Accessory Type: | Air Conditioning Accessories |
| Hydrogen Embrittlement Protection: | After Galvanizing, Conduct Dehydrogenation Treatment At A Constant Temperature Of 200℃ For 4 Hours. |
|---|---|
| Lubrication System: | Fully Synthetic Polyurea-based Lubricating Grease |
| Applicable Range: | Weichai WP10/WP12 Series Engines |
| Crankshaft Material: | 40Cr High Frequency Quenching |
|---|---|
| Applicable Scenario: | Bus Air Conditioning System |
| Accessory Type: | Air Conditioner Compressor |
| Long-life Design: | Worm Gear And Worm Structure Has A Service Life Of More Than 500,000 Kilometers. |
|---|---|
| Precision Automatic Compensation: | Real-time Detection Of Braking Clearance With An Error Control Of ±0.1mm. |
| Dynamic Load Balancing: | Multi-round Synchronous Adjustment To Avoid Braking Force Deviation. |
| Installation: | Original Position Installation, No Debugging Required. |
|---|---|
| Material And Craftsmanship: | Cast Iron / Aluminum Alloy Shell |
| Packing: | Neutral Packing Or OEM Packing |
| Low Friction Design: | Copper-based Self-lubricating Bushings Are Used, And The Friction Coefficient Is ≤ 0.08. |
|---|---|
| Security Authentication: | The Support Assembly Passes The 1.5 Times Static Load Test |
| High-precision Cooperation: | Tolerance Of Rocker Arm Shaft Hole ±0.01mm |
| Packaging: | Carton, Wooden Box, Custom Packaging |
|---|---|
| Maintenance Frequency: | Low Maintenance Requirements |
| Dust Resistance: | Built-in Dust-proof Sealing Ring |
| Installation Hole Size: | Installation Hole Diameter 48, Taper 23.5 |
|---|---|
| Accessory Type: | Suspension Connecting Ball Joint |
| Corrosion Resistance: | Salt Spray Test ≥ 500 Hours |
| Quality Commitment: | Inspection One By One, With A Pass Rate Of 100% |
|---|---|
| Packaging: | Carton, Wooden Box, Custom Packaging |
| Accessory Type: | Transmission Accessories |
| Packaging: | Carton, Wooden Box, Custom Packaging |
|---|---|
| Bench Test: | 500,000 Cycles Without Wear |
| International Certification: | ECE R79+ISO 26262 ASIL-B |
| Packaging: | Carton, Wooden Box, Custom Packaging |
|---|---|
| Fatigue Life: | 10⁶ Times Of Loop Without Breakage. |
| Applicable Scenario: | Bus Dongfeng Dana Axle |
| Material: | Fluorine Rubber (FKM) High Temperature Resistance |
|---|---|
| Medium: | Oil Resistance/acid And Alkali Corrosion Resistance |
| Seal: | Double Lip Dynamic Sealing |
| Accessory Type: | Brake Calipers - Self-adjusting Mechanism |
|---|---|
| Seal Material: | HNBR Hydrogenated Nitrile Rubber |
| Shell Material: | Vermicular Cast Iron CGI450 |
