| Pressure Range | Compatible With The Normal Pressure Of The Bus Pneumatic System |
|---|---|
| Suitable For Multiple Scenarios | Applicable To Mainstream Buses Such As Yutong And King Long |
| Emergency Operation | Support Manual Opening Of The Car Door In Case Of Emergency |
| Plug And Play | Supports Direct Replacement Of The Original Car Interface |
| Automatic Control | Adapt To The Original Factory Pneumatic Control System |
| Anti-vibration Performance | 10g Acceleration Test. Passed ISO 16750-3 Road Vibration Test. |
|---|---|
| Thread Technology | Cold Heading Forming + Thread Rolling Treatment |
| Tensile Strength | 10.9 Grade High-strength Certification |
| Anti-jamming Processing | Molybdenum Disulfide Coating |
| Resistant To Low Temperature | -40℃ Anti-brittle Cracking |
| Packaging | Carton, Wooden Box, Custom Packaging,foam |
|---|---|
| Connection Method | Bolted/Spherical Hinged |
| Fatigue Crack Growth Rate | Paris Formula D Level |
| Salt Spray Test Standard | ISO 9227 CASS Cycle |
| Accessory Type | Hanging Accessories |
| Packaging | Carton, Wooden Box, Custom Packaging |
|---|---|
| Emergency Unlocking Type | Cockpit Pull Wire + Mechanical Key |
| Protection Level | IP67 (lock Body)/IP54 (keyhole) |
| Accessory Type | Engine Hood Mechanical Lock |
| International Certification | GB 15743-2022 |
| Packaging | Carton, Wooden Box, Custom Packaging |
|---|---|
| Applicable Scenario | Air Pressure Detection Of Air Reservoir |
| Product Model | QG2221E1-L654M3 |
| Accessory Type | Air Pressure Sensor |
| Shell Material | Stainless Steel |
| Control | Intermittent Speed Regulation Mode |
|---|---|
| Install | Original Car Hole Direct Installation |
| Material | All Aluminum Die-casting Shell |
| Bearing | Stainless Steel Sealed Shaft |
| Compatible | Multi-segment Wiper Arm |
| Input Torque | 10N・m (commercial Vehicle) |
|---|---|
| Noise Control | Meshing Noise ≤ 65 DB |
| Metal Category | 40Cr Quenched Steel |
| Installation Method | Spline Connection |
| Accessory Type | Gear Converter |
| Temperature Adaptability | Wide Temperature Range (-30℃~80℃) Operation |
|---|---|
| Operation Mode | Manual Override Mechanical Transmission |
| Wear Resistance | Low-friction Coefficient Coating Process |
| Transmission | Dual-cable Synchronized Push-pull |
| Adjustment | Telescopic Lever Length Adjustment |
| Packaging | Carton, Wooden Box, Custom Packaging |
|---|---|
| Torque Recommended Value | Wheel Hub Screws 130-150N·m |
| Accessory Type | Wheel Nuts And Gaskets |
| Thread Type | M20×1.5、M22×1.5 |
| Washer | HV300 Hardness |
| Smooth Treatment Of Inner Wall | Roughness Ra ≤ 1.6 μm, Pressure Drop Reduced By 20%. |
|---|---|
| Packaging | Carton, Wooden Box, Custom Packaging |
| Pulse Test | 100,000 Pressure Cycles |
| Metal Joint | Thicken The Pipe Wall |
| Accessory Type | Warm Air Accessories |