Quality Commitment | Inspection One By One, With A Pass Rate Of 100% (supporting Attached Inspection Reports) |
---|---|
Packaging | Carton, Wooden Box, Custom Packaging |
Model | AVi168SP3003.3701-02195 |
International Certification | CE/IATF 16949+ISO 14001 |
Low Noise Design | No-load Noise≤65dB |
Pressure Range | Compatible With The Normal Pressure Of The Bus Pneumatic System |
---|---|
Suitable For Multiple Scenarios | Applicable To Mainstream Buses Such As Yutong And King Long |
Emergency Operation | Support Manual Opening Of The Car Door In Case Of Emergency |
Plug And Play | Supports Direct Replacement Of The Original Car Interface |
Automatic Control | Adapt To The Original Factory Pneumatic Control System |
Environmental Adaptability | Salt Spray / Sand Dust / High Temperature Working Conditions |
---|---|
Security Features | Overload Protection Breaking Strength ≥ 30MPa |
Service Life | 5 - 7 Year Anti - Aging Cycle |
Tear Resistance Strength | Tensile Strength ≥ 20MPa |
Material Of Metal Parts | 20# Seamless Steel Pipe |
Pressure Characteristics | Turn On The Pressure Deviation ≤ ±0.3 Bar |
---|---|
Certification Standards | QC/T 29105+ IATF 16949:2016 |
Sealing System | Double - Lip Sealing Structure |
Structural Design | Spring-loaded Plunger Valve |
Lubrication System | Lithium-based Grease Filling |
Power | Low Energy Consumption |
---|---|
Heating | Rapid Temperature Rise |
Shell | Corrosion Resistance |
Maintenance | Maintenance-free |
Movement | All Copper Material |
Skeleton | Cathodic Electrophoretic Diamond Wire Mesh |
---|---|
Typical Dimensions | Outer Diameter Φ250mm × Height Φ460mm |
Vibration Resistance Performance | 10 - 500Hz Sweep Frequency Vibration Test |
Filter Paper | Imported Composite Fiber Filter Paper |
Transportation Protection | Compressive Strength ≥ 500N |
Packaging | Carton, Wooden Box, Custom Packaging |
---|---|
Surface Treatment | Galvanized Layer Thickness ≥ 8μm. |
Materials | 40Cr Alloy Structural Steel |
Fatigue Life | ≥1 Million Cycles |
Working Temperature Range | -40℃~+85℃ |
Suitable Models | Applicable To A Full Range Of Passenger Car Pneumatic Door Pump Systems. |
---|---|
Installation Form | Support Panel Embedded Installation Or Pipeline Docking Installation |
Surface Treatment | Carry Out Galvanized, Dacromet Or Electrophoretic Anti-rust Treatment |
Operating Temperature | Can Work In A Wide Temperature Range From -40 ° C To 125 ° C |
Ease Of Disassembly | Quick Release Buckle Structure For Easy Disassembly |
Packaging | Carton, Wooden Box, Custom Packaging |
---|---|
Structural Design | Precision Gear And Rack Transmission |
Lubrication Method | Long-term Grease Lubrication |
Materials | High-strength Steel Shell |
Model | Steering Gear Assembly |
Dual Frequency Superposition | High Frequency (400-500Hz) + Low Frequency (200-300Hz) |
---|---|
Durability Test | Continuous Operation For 100 Hours Without Failure |
Packaging | Carton, Wooden Box, Custom Packaging |
Surface Galvanizing | Salt Spray Test ≥ 720 Hours |
Voltage | 24V (wide Voltage 18-32V) |