| Safety Features | Sawtooth Back Plate + High-strength Resin Bonding |
|---|---|
| Weight Loss Advantage | Adopt 6061-T6 Aviation Aluminum Back Plate. |
| Performance Advantages | Stable Value Of Friction Coefficient: 0.43 ± 0.02 |
| Long-term Design | Edge Chamfering + Arc Friction Surface |
| Production Standard | Batch Defect Rate ≤ 0.01%. |
| Composition | Adopt The Formula Of High Vinyl Rubber + Aramid Fiber + Wollastonite. |
|---|---|
| Performance Advantages | Friction Coefficient Stability Is Increased By 20%. |
| Noise Reduction Effect | Combined With Double-layer Silencing Sheet |
| Compliance | Passed The EU Certification Of ECE R90. |
| Maintenance Efficiency | 3 Minutes Tool-free Replacement |
| Material | Semi-metal Ceramic Composite |
|---|---|
| Product Model | WVA29126/VIE19.5W-3501190 |
| Certification Standards | ISO 26262/TS16949 |
| Service Life | ≥80,000 Kilometers |
| Size | 210.5*92.3*30 |
| Convenient Maintenance | Fifteen-degree Diversion Chamfer At The Edge Of The Friction Block. |
|---|---|
| Performance Advantages | Stable Value Of Friction Coefficient: 0.45±0.03 |
| Weight Loss Advantage | Adopt ADC12 Aluminum Alloy Backplane. |
| Materials | High Temperature Ceramic Formula |
| Product Model | VIE-19.5W-3501190,WVA29126 |
| Bench Fatigue Test | 800,000 Times Of Trouble-free Braking Cycles |
|---|---|
| Semi-metal Reinforced Material | Wear Rate ≤0.35mm/10,000 Times. |
| Wear Rate | ≤0.3mm / Ten Thousand Times |
| Brake Pad Back Plate Coating | Food Grade Grease |
| Coefficient Of Thermal Expansion | ≤12×10⁻⁶/℃ |
| Low-temperature Starting Performance | -20℃ Cold Friction Coefficient ≥ 0.3 |
|---|---|
| Product Model | JH3501AD01-040、WVA29088 |
| Wear Rate | ≤0.3mm / Ten Thousand Times |
| Fatigue Test | 500,000 Fatigue Tests |
| Brake Pad Size | 175.5*85.6*26 |
| Adapt To | - Wide Temperature Range Environment From - 40℃ To 80℃ |
|---|---|
| Protection Level | IP65 Dustproof And Splash-proof |
| Brand Compatibility | Jinlong / Higer / Zhongtong |
| Safety Level | B+ Level Anti-theft Standard |
| Key Insertion And Extraction Lifespan | ≥100,000 Times |
| Installation Compatibility | Compatible With Different Accessory Layouts Of Front/rear Overhangs |
|---|---|
| Maintenance Warning | Wear Marker Lines Are Set On The Surface Of The Wheel Hub. |
| Temperature Adaptation | Works In The Full Temperature Range From -40℃ To +120℃ |
| Material Composition | The Wheel Hub Is Made Of HT250 Gray Cast Iron. |
| Fatigue Life | After 500,000 Cycles Of Load Testing |
| Size | Standard |
|---|---|
| Part Number | MK4/MK8 |
| Positioning Accuracy | ±0.5° |
| Material | Aluminum Alloy |
| Operating Temperature | -40℃~85℃ |
| Temperature Adaptation | Operating In The Full Temperature Range From -55℃ To 105℃ |
|---|---|
| Environmental Tolerance | Neutral Salt Spray Test: No Red Rust For 1000 Hours |
| Vibration Test | Pass The 5-2000Hz Random Vibration Test |
| Pressure Parameters | Rated Working Pressure 0.3-1.0MPa |
| Durability Performance | Complete 3000 Buffer Stroke Tests |