| Quality Guarantee | 3 Years / 150,000 Kilometers |
|---|---|
| Long-distance Driving | Fatigue Is Reduced By 30% |
| Material | Steel Quality |
| Fatigue Test | Fatigue Test |
| The Hardness Reaches | HRC58-62 |
| Installation Compatibility | Compatible With Different Accessory Layouts Of Front/rear Overhangs |
|---|---|
| Maintenance Warning | Wear Marker Lines Are Set On The Surface Of The Wheel Hub. |
| Temperature Adaptation | Works In The Full Temperature Range From -40℃ To +120℃ |
| Material Composition | The Wheel Hub Is Made Of HT250 Gray Cast Iron. |
| Fatigue Life | After 500,000 Cycles Of Load Testing |
| System Linkage | Works In Conjunction With The Thermostat (opening Temperature 82℃) |
|---|---|
| Temperature Adaptation | Works In The Full Temperature Range From -40℃ To 120℃ |
| Impact Vibration | Can Withstand An Acceleration Impact Of 20g |
| Sealing Technology | Adopt Cartridge Mechanical Seal |
| Impeller Optimization | Backward Centrifugal Impeller |
| Vehicle Model Coverage | Designed Specifically For Buses Such As King Long KLQ6129, Higer H6C, Yutong ZK6126, Etc. |
|---|---|
| Temperature Range | Stable Operation Over The Entire Temperature Range From -40℃ To 125℃ |
| Response Speed | The Dynamic Response Time During Load Mutation Is Less Than 10ms. |
| Adjustment Accuracy | Voltage Fluctuation Within The Full Load Range ≤ ±0.5% FS |
| Output Voltage | Precisely Adapted To 24V Vehicle Electrical Systems |
| Temperature Range Adaptation | Operates In The Full Temperature Range From -26℃ To 204℃ |
|---|---|
| Installation Requirements | Recommended Installation Pressure: 5-8kN |
| Durability | After 500,000 Reciprocating Motion Tests |
| Lubrication Compatibility | Compatible With GL-5 Grade Gear Oil |
| Environmental Compliance | Heavy Metal Content ≤ 0.01% |
| Fatigue Life | No Cracks After 500,000 Cycles Of Testing |
|---|---|
| Suspension Adaptation | Used In Air Suspension Systems |
| Itinerary Specifications | Axial Effective Stroke 55mm |
| Pressure Range | Working Pressure 3-8bar |
| Vibration Attenuation | Natural Frequency 2.8Hz |
| Temperature Range | -40℃~125℃ Full Temperature Range Operation |
|---|---|
| Precise Matching | Specifically For King Long, Golden Dragon, Yutong Buses' Yuchai Engines |
| Bearing Configuration | Double Row Angular Contact Ball Bearing |
| Surface Treatment | Zinc Coating Thickness 8-12μm |
| Tension Range | 300-600N Dynamic Adjustment |
| Temperature Range | Operates In The Full Temperature Range From -40℃ To 140℃ |
|---|---|
| Oil Resistance Characteristics | Resistant To Diesel And Engine Oil Immersion For 168 Hours |
| Probe Material | 304 Stainless Steel Integrally Formed Probe Rod |
| Float Design | Oil-resistant PA66 + Glass Fiber Float |
| Accuracy Class | Measurement Error ≤ ±3mm |
| Life Expectancy Indicator | The Effective Service Life Of The Desiccant Is ≥ 80,000 Kilometers |
|---|---|
| Install Protection | The Recommended Intake Air Temperature Is ≤ 65℃ |
| System Compatibility | Match The Output Of The Electric Air Compressor |
| Handle Traffic | Rated Air Intake Rate 340L/min±10L/min |
| Desiccant Configuration | Composite Molecular Sieve Desiccant |
| Fatigue Life | Tested Under Simulated Working Conditions For More Than 1 Million Times |
|---|---|
| Precision Manufacturing | The Precision Control Of Knurling And Threading Is Within ±0.05mm |
| Surface Treatment | Anti-corrosion Phosphating And Oil Immersion |
| Material | High-quality Alloy Structural Steel |
| ConMet Original Factory Warranty | 3 Years Or 500,000 Kilometers |