| Connection Method | The Ball Head Pin Is Tapered And Matched With The Stabilizer Bar Support. |
|---|---|
| Compatible Vehicle Models | Yutong Models Such As ZK6120H/6118Y2/6805DX |
| Wear-resistant Design | Spherical Surface Hard Chromium Plating |
| Fatigue Life | 2 Million Times Of Swing Angle Cycles |
| Structural Design | Double Ball - Head All - Metal Joint |
| Compatible Vehicle Models | Yutong Models Such As ZK6120H/6118Y2/6805DX |
|---|---|
| Storage Conditions | Dry And Light - Avoiding Environment |
| Fatigue Life | 1 Million Times Of Swing Angle Cycles |
| Structural Design | Double-ball Seat All-metal Joint |
| Disassembly Tools | 27mm Plum Blossom Wrench |
| Pressure Characteristics | Turn On The Pressure Deviation ≤ ±0.3 Bar |
|---|---|
| Certification Standards | QC/T 29105+ IATF 16949:2016 |
| Sealing System | Double - Lip Sealing Structure |
| Structural Design | Spring-loaded Plunger Valve |
| Lubrication System | Lithium-based Grease Filling |
| Length | L=250mm,L=275mm |
|---|---|
| Shaft Diameter | Φ35mm,Φ40mm |
| Damping Coefficient | 10~12N・s/mm |
| Base Material | 40Cr Alloy Steel |
| Critical Speed | ≥8000r/min |
| Surface Roughness | The Inner Wall Has A Surface Roughness Ra≤0.8μm, And The Outer Wall Has A Surface Roughness Ra≤1.6μm. |
|---|---|
| Inner Diameter | φ35mm φ40mm φ45mm φ50mm Can Be Customized |
| Install Tools | Special Hydraulic Sleeve Pressing Machine |
| Mainstream Adaptation | Yutong ZK6120H/6115BEV/6850 Series |
| Damping Coefficient | 10~15N・s/mm |
| Color Coding | The Rod Part Is Painted With Yellow Identification Paint |
|---|---|
| Detection Cycle | Disassemble And Inspect Every 15,000 Kilometers |
| Spherical Gap | Axis Right - Angled Direction 0.025~0.065mm |
| Execution Standards | QC/T 328-1999, IATF 16949:2016 |
| Nitriding Treatment | Nitriding Layer Depth 0.3 - 0.5mm |
| Skeleton | Cathodic Electrophoretic Diamond Wire Mesh |
|---|---|
| Typical Dimensions | Outer Diameter Φ250mm × Height Φ460mm |
| Vibration Resistance Performance | 10 - 500Hz Sweep Frequency Vibration Test |
| Filter Paper | Imported Composite Fiber Filter Paper |
| Transportation Protection | Compressive Strength ≥ 500N |
| Package | Wrapped With Rust-proof Paper + Sealed With Polyethylene Bag |
|---|---|
| Wading Conditions | The Surface Is Sprayed With A Polytetrafluoroethylene Coating. |
| Torque Requirements | The Tightening Torque Of The Installation Bolt Is 80 - 100N·m |
| Size | Outer Diameter Φ85mm × Height 130mm |
| Anti-corrosion Coating | Metal Skeleton Cathodic Electrophoresis |
| Special Rubber Composite Layer | Oil-resistant/Ozone-resistant/Aging-resistant Formula |
|---|---|
| Transient Temperature Rise Suppression | Operating Temperature Range: -40℃ To +120℃ |
| Multi - Directional Damping Structure | Suppress Multi - Axis Vibration Transmission |
| Memory Alloy Limit Ring | Temperature Adaptive Deformation Recovery |
| Modular Interface | Quick - Detachable Clamp Connection |
| Fatigue Life | ≥200ten Thousand Times |
|---|---|
| Salt Spray Test | No Corrosion Within 480h |
| Material | Specialty Rubber |
| Dynamic Stiffness | 300~500N/mm |
| Hardness | 70±5 Shore A |