| Lubrication Design | Automatic Lubricating Mechanism |
|---|---|
| Maintenance Cost | The Pump Sleeve Can Be Replaced. |
| Technical Certification | WABCO Global Standards |
| Product Model | 1604-00868 9700516080 |
| Sealing Technology | New Type Exhaust Valve |
| Input Torque | 10N・m (commercial Vehicle) |
|---|---|
| Noise Control | Meshing Noise ≤ 65 DB |
| Metal Category | 40Cr Quenched Steel |
| Installation Method | Spline Connection |
| Accessory Type | Gear Converter |
| Environmental Adaptability | Salt Spray / Sand Dust / High Temperature Working Conditions |
|---|---|
| Security Features | Overload Protection Breaking Strength ≥ 30MPa |
| Service Life | 5 - 7 Year Anti - Aging Cycle |
| Tear Resistance Strength | Tensile Strength ≥ 20MPa |
| Material Of Metal Parts | 20# Seamless Steel Pipe |
| Smooth Treatment Of Inner Wall | Roughness Ra ≤ 1.6 μm, Pressure Drop Reduced By 20%. |
|---|---|
| Packaging | Carton, Wooden Box, Custom Packaging |
| Pulse Test | 100,000 Pressure Cycles |
| Metal Joint | Thicken The Pipe Wall |
| Accessory Type | Warm Air Accessories |
| Service Life | Under Normal Operating Conditions, It Exceeds 10,0000 Kilometers And Is Durable. |
|---|---|
| Lubrication Method | Pre-fill Long-lasting Grease To Avoid Frequent Maintenance. |
| Surface Treatment | Anti-corrosive Coating For A Long-lasting Appearance. |
| Material | High-quality Chromium Steel |
| Accessory Type | Clutch Release Bearing |
| High-strength Aluminum Alloy Cylinder Block | Dual Advantages Of Lightweight And Corrosion Resistance |
|---|---|
| Quick Installation | 2 Bolts Fixed. Replacement Completed Within 15 Minutes. |
| Silent Operation | Air Pressure Adjustment Noise Is Less Than 45 Decibels. |
| Accessory Type | Pneumatic Support Rod For Cabin Door/seat |
| Packaging | Carton, Wooden Box, Custom Packaging |
| Surface Roughness | The Inner Wall Has A Surface Roughness Ra≤0.8μm, And The Outer Wall Has A Surface Roughness Ra≤1.6μm. |
|---|---|
| Inner Diameter | φ35mm φ40mm φ45mm φ50mm Can Be Customized |
| Install Tools | Special Hydraulic Sleeve Pressing Machine |
| Mainstream Adaptation | Yutong ZK6120H/6115BEV/6850 Series |
| Damping Coefficient | 10~15N・s/mm |
| Special Customization | Support Diameter Specifications From Φ75 To Φ105mm And Length Specifications From 110 To 150mm |
|---|---|
| Dynamic Fatigue | 100kN Alternating Load Cycles 100,000 Times |
| Rubber Body | Ethylene Propylene Diene Monomer Rubber |
| Hollow Pin Shaft | Seamless Steel Pipe Hot Forging Forming |
| Rotation Angle | ±15° Without Jamming |
| Shock Absorption Characteristics | Metal Ball Hinge And Rubber Vulcanization Composite Structure |
|---|---|
| Temperature Resistance Range | Adaptable To All Climates From - 25℃ To 70℃ |
| Installation Hole Configuration | 4 Holes Are Symmetrically Distributed Axially |
| Dynamic Fatigue Life | 50,000 - Cycle Load Durability Certification |
| Static Stiffness Parameters | 30000±15% N/mm Bearing Capacity |
| Quality Commitment | Inspection One By One, With A Pass Rate Of 100% |
|---|---|
| Packaging | Carton, Wooden Box, Custom Packaging |
| Surface Treatment | Electrophoretic Baking Finish Process |
| Applicable Scenario | Bus Luggage Compartment Door Lock |
| Model | Luggage Compartment Door Lock |