| Lifespan | ≥200,000 Start - Stop Cycles |
|---|---|
| Adopt | 24V DC Power Supply |
| Low Speed | Approximately 40rpm |
| Carbon Brush Material | Copper Content ≥ 85% |
| High Speed | About 60rpm |
| Model | 3412-00153 |
|---|---|
| Adopt | 40Cr |
| Tensile Strength | ≥650MPa |
| Industry | Integral Forging Process |
| Hardened Layer | 0.8-1.2mm |
| Material Composition | The Cylinder Block Is Made Of 6061 - T6 Aluminum Alloy. |
|---|---|
| Pressure Range | Working Air Pressure 0.4 - 0.8MPa |
| Vibration-resistant Design | Pass The Random Vibration Test |
| Power Adaptation | Compatible With 24V DC |
| Intelligent Anti-pinch | Built-in Pressure Sensor |
| Salt Spray Protection | 5% NaCl Solution Salt Spray Test For 48 Hours |
|---|---|
| Vibration Resistance | Pass The 10-2000Hz Random Vibration Test |
| Electrical Parameters | Operating Voltage 24V DC |
| Intelligent Adjustment | Support Automatic Mode |
| Energy-saving Control | Idle State (≤800r/min) |
| Material Composition | The Rolling Elements Are Made Of GCr15 High-carbon Chromium Bearing Steel |
|---|---|
| High Temperature Durability | 120℃ Constant Temperature Test For 1000 Hours |
| Temperature Adaptation | -40℃ To 120℃ Wide Temperature Range |
| Response Characteristics | Separation Lag Time ≤ 0.2 Seconds |
| Adaptation Specifications | Eaton Automatic Transmission |
| Adaptation Specifications | Designed Specifically For 10-18 Seat School Buses Such As Jinlong |
|---|---|
| Compliance Certification | Certified By ECE R10 Electromagnetic Compatibility Certification |
| Protection Level | The Entire Machine Meets The IP6K9K Protection Standard. |
| Seismic Performance | Pass The 10-2000Hz Random Vibration Test |
| Environmental Adaptation | Operating Temperature -40℃ To 85℃ |
| Temperature Adaptation | Operating In The Full Temperature Range From -40℃ To 85℃ |
|---|---|
| Environmental Design | Dacromet Coating Does Not Contain Hexavalent Chromium |
| Material Composition | Adopt Q345B Low-alloy High-strength Steel |
| Shock Resistance | Can Withstand 100g Half-sine Wave Impact |
| Vibration Test | Pass The 5-2000Hz Random Vibration Test |
| Environmental Resistance Performance | 720 Hours Of Neutral Salt Spray Test With No Corrosion |
|---|---|
| Fatigue Life | After 1,000,000 Cycles Of Load Testing |
| Buffering Performance | Preset 25% Compression Amount |
| Installation Method | Fixed By The Central Bolt |
| Load Capacity | Static Limit Load ≥ 50kN |
| Size Specifications | Nominal Diameter φ23mm, Effective Thread Length 94mm, Total Length 104mm |
|---|---|
| Temperature Adaptation | Works In The Full Temperature Range From -50℃ To +150℃ |
| Vibration Test | Pass The 5-2000Hz Random Vibration Test |
| Material Composition | Adopt 42CrMo High-strength Alloy Steel |
| Torque Requirements | Installation Torque Range 200-250N・m |
| 360° Multi-directional Adjustment | The Double-layer Blade Structure Supports Manual Adjustment Of ±45° Up And Down, And ±60° Left And Right. |
|---|---|
| Environmental Certification | The Material Meets The Requirements Of The ELV Directive |
| Material Composition | The Air Outlet Panel Is Made Of ABS Engineering Plastic. |
| Modular Integrated Design | The Air Outlet And The Speaker Are Integrally Formed. |
| Adaptable Voltage | Supports 12-24V Wide-range DC Power Supply |