| Pressure Range | Compatible With The Normal Pressure Of The Bus Pneumatic System |
|---|---|
| Suitable For Multiple Scenarios | Applicable To Mainstream Buses Such As Yutong And King Long |
| Emergency Operation | Support Manual Opening Of The Car Door In Case Of Emergency |
| Plug And Play | Supports Direct Replacement Of The Original Car Interface |
| Automatic Control | Adapt To The Original Factory Pneumatic Control System |
| Service Life | Under Normal Operating Conditions, It Exceeds 10,0000 Kilometers And Is Durable. |
|---|---|
| Lubrication Method | Pre-fill Long-lasting Grease To Avoid Frequent Maintenance. |
| Surface Treatment | Anti-corrosive Coating For A Long-lasting Appearance. |
| Material | High-quality Chromium Steel |
| Accessory Type | Clutch Release Bearing |
| Power Source | Hydraulic And Pneumatic Dual Power |
|---|---|
| Heat Recession Resistance | Continuous Braking Stability |
| Precision Assembly | Multi-point Smart Locking |
| Environmental Friendliness | No Mineral Oil Pollution |
| Ease Of Maintenance | Modular Disassembly |
| Anti-vibration Performance | 10g Acceleration Test. Passed ISO 16750-3 Road Vibration Test. |
|---|---|
| Thread Technology | Cold Heading Forming + Thread Rolling Treatment |
| Tensile Strength | 10.9 Grade High-strength Certification |
| Anti-jamming Processing | Molybdenum Disulfide Coating |
| Resistant To Low Temperature | -40℃ Anti-brittle Cracking |
| Packaging | Carton, Wooden Box, Custom Packaging,foam |
|---|---|
| Connection Method | Bolted/Spherical Hinged |
| Fatigue Crack Growth Rate | Paris Formula D Level |
| Salt Spray Test Standard | ISO 9227 CASS Cycle |
| Accessory Type | Hanging Accessories |
| Shock Absorption Characteristics | Metal Ball Hinge And Rubber Vulcanization Composite Structure |
|---|---|
| Temperature Resistance Range | Adaptable To All Climates From - 25℃ To 70℃ |
| Installation Hole Configuration | 4 Holes Are Symmetrically Distributed Axially |
| Dynamic Fatigue Life | 50,000 - Cycle Load Durability Certification |
| Static Stiffness Parameters | 30000±15% N/mm Bearing Capacity |
| Packaging | Carton, Wooden Box, Custom Packaging |
|---|---|
| Emergency Unlocking Type | Cockpit Pull Wire + Mechanical Key |
| Protection Level | IP67 (lock Body)/IP54 (keyhole) |
| Accessory Type | Engine Hood Mechanical Lock |
| International Certification | GB 15743-2022 |
| Temperature Adaptability | Wide Temperature Range (-30℃~80℃) Operation |
|---|---|
| Operation Mode | Manual Override Mechanical Transmission |
| Wear Resistance | Low-friction Coefficient Coating Process |
| Transmission | Dual-cable Synchronized Push-pull |
| Adjustment | Telescopic Lever Length Adjustment |
| Packaging | Carton, Wooden Box, Custom Packaging |
|---|---|
| Torque Recommended Value | Wheel Hub Screws 130-150N·m |
| Accessory Type | Wheel Nuts And Gaskets |
| Thread Type | M20×1.5、M22×1.5 |
| Washer | HV300 Hardness |
| Applicable Scenario | Bus Liquid Heater Water Pipe Connection Joint |
|---|---|
| Packaging | Carton, Wooden Box, Custom Packaging |
| Ageing Resistance | 1000h High Temperature Aging |
| Accessory Type | Warm Air Pipe Joint |
| Temperature | -40℃~125℃ |