Range | LED Model ≥200 Meters / Xenon Model ≥250 Meters |
---|---|
Quality Commitment | Inspection One By One, With A Pass Rate Of 100% |
Packaging | Carton, Wooden Box, Custom Packaging |
Shell | Aviation Aluminum Heat Dissipation |
Illuminance Value | 20 Meters Away, ≥300 Lux. |
Long Life And Durability | Adopting High-quality Lamp Beads, The Service Life Can Reach More Than 50,000 Hours. |
---|---|
High Brightness Lighting | Ensure Sufficient Lighting In The Carriage To Meet The Needs Of Reading And Passage. |
Multicolor Ambient Light | Support Single-color Or Gradient Mode To Create A Comfortable Atmosphere. |
Soft And Not Dazzling | Adopt Warm Light Or Soft Light Design To Protect Passengers' Eyesight. |
Low Power Consumption Design | Reduce Vehicle Energy Consumption And Improve Cruising Range. |
Compatible Vehicle Models | Yutong Models Such As ZK6120H/6118Y2/6805DX |
---|---|
Storage Conditions | Dry And Light - Avoiding Environment |
Fatigue Life | 1 Million Times Of Swing Angle Cycles |
Structural Design | Double-ball Seat All-metal Joint |
Disassembly Tools | 27mm Plum Blossom Wrench |
Packaging | Carton, Wooden Box, Custom Packaging |
---|---|
Emergency Unlocking Type | Cockpit Pull Wire + Mechanical Key |
Protection Level | IP67 (lock Body)/IP54 (keyhole) |
Accessory Type | Engine Hood Mechanical Lock |
International Certification | GB 15743-2022 |
Protect | Overload Short Circuit Self-disconnection |
---|---|
Type | Permanent Magnet Brushless Motor |
Product Model | 3701-00781 AVi144 2112-VPP |
Efficiency | 90% Energy Conversion |
Material | All Copper Winding Coil |
Surface Roughness | The Inner Wall Has A Surface Roughness Ra≤0.8μm, And The Outer Wall Has A Surface Roughness Ra≤1.6μm. |
---|---|
Inner Diameter | φ35mm φ40mm φ45mm φ50mm Can Be Customized |
Install Tools | Special Hydraulic Sleeve Pressing Machine |
Mainstream Adaptation | Yutong ZK6120H/6115BEV/6850 Series |
Damping Coefficient | 10~15N・s/mm |
Anti-vibration Performance | 10g Acceleration Test. Passed ISO 16750-3 Road Vibration Test. |
---|---|
Thread Technology | Cold Heading Forming + Thread Rolling Treatment |
Tensile Strength | 10.9 Grade High-strength Certification |
Anti-jamming Processing | Molybdenum Disulfide Coating |
Resistant To Low Temperature | -40℃ Anti-brittle Cracking |
Quality Commitment | Inspection One By One, With A Pass Rate Of 100% (supporting Attached Inspection Reports) |
---|---|
Packaging | Carton, Wooden Box, Custom Packaging |
Low-temperature Starting Performance | -20℃ Cold Friction Coefficient ≥ 0.3 |
Wear Rate | ≤0.3mm / Ten Thousand Times |
Material Type | Ceramic Composite Sheet |
Crankshaft Material | 40Cr High Frequency Quenching |
---|---|
Applicable Scenario | Bus Air Conditioning System |
Accessory Type | Air Conditioner Compressor |
Sealing Technology | Laser Welding + O-ring |
Packaging | Foam, Carton |
Smooth Treatment Of Inner Wall | Roughness Ra ≤ 1.6 μm, Pressure Drop Reduced By 20%. |
---|---|
Packaging | Carton, Wooden Box, Custom Packaging |
Pulse Test | 100,000 Pressure Cycles |
Metal Joint | Thicken The Pipe Wall |
Accessory Type | Warm Air Accessories |