Service Life | 3000-5000 Hours (depending On Working Conditions) |
---|---|
Packaging | Carton, Wooden Box, Custom Packaging,foam |
Ambient Temperature | (-40 ℃~ 85 ℃) Wide Temperature Range |
Regeneration Method | Automatic Timing/pressure Triggering |
Material | Aluminum Alloy Valve Body |
Suitable Models | Applicable To A Full Range Of Passenger Car Pneumatic Door Pump Systems. |
---|---|
Installation Form | Support Panel Embedded Installation Or Pipeline Docking Installation |
Surface Treatment | Carry Out Galvanized, Dacromet Or Electrophoretic Anti-rust Treatment |
Operating Temperature | Can Work In A Wide Temperature Range From -40 ° C To 125 ° C |
Ease Of Disassembly | Quick Release Buckle Structure For Easy Disassembly |
Maximum Trampling Angle | ±30° (matching The Acceleration Characteristics Of Passenger Cars) |
---|---|
Reset Spring Force | 5N・m~15N・m (Simulate The Foot Feel Of Traditional Throttle) |
Fail-safe Mode | Trigger Safe Idle Speed Or Limp Home Mode In Case Of Failure. |
Pedal Force Feedback | Adjustable Damping |
Accessory Type | Electronic Gas Pedal |
Packaging | Carton, Wooden Box, Custom Packaging,foam |
---|---|
Product Model | VIE22.5K-3501116,VIE22.5K- 3501216 |
Diaphragm Material | Nitrile Rubber With Fabric Insertion |
Push Rod Material | Surface Galvanized Carbon Steel |
Cylinder Block Material | High-strength Aluminum Alloy |
Self-inspection | Check For Faults Before Ignition And Provide Timely Warnings. |
---|---|
Interface | General Standards For Easy Installation. |
Standby | Power Consumption Within 3mA. |
Electric Current | Instantaneous 100A Tolerance |
Gear Shifting | LOCK、ACC、ON、START |
Resistance To Pressure | High Pressure Resistant Gas |
---|---|
Pressure | Stable Without Fluctuations |
Material | Aluminum Alloy Valve Body |
Maintenance | Maintenance-free Design |
Control | Precision And Stability |
General Interface | Adapt To Mainstream Wiper Arms. |
---|---|
Motor Type | DC Permanent Magnet Motor |
Silent Operation | Noise Reduction Gear Design |
Product Model | ZD1531A 50W |
International Certification | CE/EAC/GOST |
Vibration Resistance Level | Passed The Vibration Test According To GB/T 2423.10. |
---|---|
General-purpose Interface | Adapt To 90% Of Passenger Car Seats |
Dynamic Shock Absorption Effect | High-frequency Vibration Filtration |
Accessory Type | Driver's Seat Shock Absorber |
Shock Absorption Form | Hydraulic Type |
Bench Fatigue Test | 800,000 Times Of Trouble-free Braking Cycles |
---|---|
Semi-metal Reinforced Material | Wear Rate ≤0.35mm/10,000 Times. |
Wear Rate | ≤0.3mm / Ten Thousand Times |
Brake Pad Back Plate Coating | Food Grade Grease |
Coefficient Of Thermal Expansion | ≤12×10⁻⁶/℃ |
Composition | Adopt The Formula Of High Vinyl Rubber + Aramid Fiber + Wollastonite. |
---|---|
Performance Advantages | Friction Coefficient Stability Is Increased By 20%. |
Noise Reduction Effect | Combined With Double-layer Silencing Sheet |
Compliance | Passed The EU Certification Of ECE R90. |
Maintenance Efficiency | 3 Minutes Tool-free Replacement |