Packaging | Carton, Wooden Box, Custom Packaging |
---|---|
Key Life | 100,000 Presses Of Silicone Keys |
Shell Material | ABS Engineering Plastic |
Accessory Type | Door Remote Control |
Control Channel | Single-door Control |
Quality Commitment | Inspection One By One, With A Pass Rate Of 100% |
---|---|
Packaging | Carton, Wooden Box, Custom Packaging |
B10 Life | Have A B10 Life Of 5000 Hours. |
Waterproof Level | Reach IP67 Waterproof Rating. |
Speed Range | Between 2000 - 4000 Rpm. |
High Load Capacity | Maximum Bearing Torque Is 200 N·m And Is Suitable For Large-displacement Engines. |
---|---|
High Temperature Resistant Seal | Fluororubber Oil Seal, Capable Of Withstanding High-temperature Oil At 180℃. |
Millisecond-level Response | Adapt To Engine Speed Fluctuations And Maintain Transmission Stability. |
Anti-corrosion Coating | Electrophoretic Treatment. Salt Spray Test For 1000 Hours Without Rust. |
Dynamic Tension Compensation | Real-time Adjustment Of Belt/chain Tension With An Error Of ±0.5 N·m. |
Millisecond-level Adaptive Response | Support Dynamic Adjustment Under Complex Working Conditions Such As Cold Start Of The Engine And Rapid Acceleration. |
---|---|
Overspeed Protection | When The Rotational Speed Is Greater Than 6000 Rpm, Locking Is Triggered To Prevent The Tensioner Pulley From Flying Off. |
Timing Synchronization Guarantee | Accumulated Error Is Less Than ±0.5° Crankshaft Angle To Avoid The Risk Of Knocking Caused By Valve Timing Deviation. |
Material And Craftsmanship | Adopt QT700-2 Nodular Cast Iron. The Tensile Strength Is ≥700 MPa. The Fatigue Life Is Over 1 Million Times. |
High-temperature Fatigue-resistant Coating | The Surface Is Sprayed With Molybdenum Disulfide (MoS₂) Dry Film, And The Friction Coefficient Is ≤0.05. |
High-strength And Wear-resistant | Adapt To The Frequent Shifting Needs Of Heavy Vehicles. |
---|---|
Anti-fatigue Design | Cycle Life Exceeds 500,000 Times Without Deformation. |
Shock Absorption | Rubber Damping Block Reduces Shift Shock. |
Quick Response | Complete Gear Shifting Within 0.2 Seconds. |
Low Temperature Startup Optimization | Work Normally In An Environment Of -40℃. |
Packaging | Carton, Wooden Box, Custom Packaging |
---|---|
Thermal Fading | High Temperature Inhibition |
Materials | Ceramic Composite Formula |
Structure | High Compressive Strength |
Maintenance | Low Dust And Easy To Clean. |
Quality Commitment | Inspection One By One, With A Pass Rate Of 100% |
---|---|
Packaging | Carton, Wooden Box, Custom Packaging |
Noise Reduction Design | Non-metallic Elastic Bushing |
Overload Protection | Shear Pin Safety Structure |
Accessory Type | Bus Transmission Shaft |
Quality Commitment | Inspection One By One, With A Pass Rate Of 100% |
---|---|
Packaging | Carton, Wooden Box, Custom Packaging |
Fatigue Life | Simulate 200,000 Start-stop Cycle Tests. |
Accessory Type | Generator Maintenance Parts |
High Purity Electrographite Brush | Carbon Content ≥ 99.5% |
Power | Low Energy Consumption |
---|---|
Heating | Rapid Temperature Rise |
Shell | Corrosion Resistance |
Maintenance | Maintenance-free |
Movement | All Copper Material |
Quality Commitment | Inspection One By One, With A Pass Rate Of 100% |
---|---|
Packaging | Carton, Wooden Box, Custom Packaging |
Broken Window Head Protection Cover | ABS Engineering Plastic Buckle |
International Certification | GB 13954,CE EN 356 |
Model | Alarm Safety Hammer |