| Compatibility | Suitable For Yuchai Engine Cooling System |
|---|---|
| Packaging | Carton, Wooden Box, Custom Packaging |
| Service Life | ≥ 500,000 Secondary Start-stop Loop |
| Accessory Type | Fan Electromagnetic Clutch |
| Applicable Scenario | Yuchai Engine Ankai Bus |
| Durability | High-quality Bearings And High-temperature Grease Ensure Long Life (TM Series Is Designed To Last 100,000 Hours) |
|---|---|
| Voltage | 24V/28V Dual Compatibility |
| Control Method | Digital Intelligent Control |
| Signal Input | PWM Speed Regulation |
| Thermal Deformation Coefficient | Low Recession Design |
| Material | Fluorine Rubber (FKM) High Temperature Resistance |
|---|---|
| Medium | Oil Resistance/acid And Alkali Corrosion Resistance |
| Seal | Double Lip Dynamic Sealing |
| Pressure | Pressure Resistance 0.5MPa |
| Lifespan | 100,000 Hour Durability Test |
| Low Mutual Opening Rate | Key Code Uniqueness > 99.99% / Customizable Master Key. |
|---|---|
| Anti-prying Design | High-strength Lock Body Resists Violent Damage. |
| Stainless Steel Casing | Thickness ≥ 2mm, Anti-drilling And Anti-sawing. |
| Anti-corrosion Strengthening | Salt Spray Test: No Rust For More Than 720 Hours. |
| 3 Seconds Quick Start | Match The Emergency Needs Of Passenger Cars. |
| Strong Fastening | Can Effectively Prevent Loosening. |
|---|---|
| Technology | Thickness Of Galvanized Coating |
| Packaging | Wrap Film, Bubble Film, Foam |
| Precision Machining | Fine Manufacturing Process |
| Tensile Strength | 1141~1164 N/mm² |
| Low-temperature Starting Performance | -20℃ Cold Friction Coefficient ≥ 0.3 |
|---|---|
| Product Model | JH3501AD01-040、WVA29088 |
| Wear Rate | ≤0.3mm / Ten Thousand Times |
| Fatigue Test | 500,000 Fatigue Tests |
| Brake Pad Size | 175.5*85.6*26 |
| Material Composition | Chloroprene Rubber + Cord Reinforcement Layer |
|---|---|
| Shock Absorption Characteristics | Air Damping Shock Absorption |
| Load Range | Adapt To 12-meter Buses |
| Sealing Performance | Multi - Layer Sealed Lips |
| Application Scenarios | Bus Shock Absorption |
| Material | High-strength Aluminum Alloy Shell |
|---|---|
| Sealing Performance | High-quality Rubber Parts |
| Apply To | Weichai WP10 Engine |
| Rated Speed | 3000 - 6000r/min |
| Work Pressure | High Pressure |
| Motor Configuration | 24V Permanent Magnet Synchronous Motor |
|---|---|
| Air Volume And Air Pressure | Rated Air Volume 2500m³/h |
| Noise Control | No-load Noise ≤ 68dB (A) |
| Protection Level | IP55 Dustproof And Waterproof |
| Impeller Material | High-strength Aluminum Alloy Die-cast Impeller |
| Seal | Rubber Seals At Covers And Joints, IP54 And Above. |
|---|---|
| Material | High Strength Polypropylene |
| Accessory Type | Expansion Water Tank |
| Environmental Protection | Material Is Recyclable |
| Packaging | Independent Carton |