| Surface Treatment | Matte Blackening Treatment For The Wheel Hub |
|---|---|
| Wheel Hub Material | High-strength Nylon 66 + 30% Glass Fiber |
| Tensioner Type | Automatically Tensioned Type |
| Bearing Type | Double Row Ball Bearing |
| Proof Standard | IATF 16949/GB/T 19055 |
| Adapted Models | Specially Designed For Yutong And Other New Energy Buses As Supporting Components |
|---|---|
| Material Composition | The Bearing Is Made Of GCr15 High-carbon Chromium Bearing Steel. |
| Temperature Adaptation | Works In The Full Temperature Range From -40℃ To 120℃ |
| Strength Verification | After A Static Load Test With 1.5 Times The Rated Load |
| Bearing Assembly | Integrated With 6305RS Deep Groove Ball Bearing |
| The Shell Is Made Of | ADC12 Aluminum Alloy |
|---|---|
| Dynamic Response Time | ≤0.3 Seconds |
| Wheel Body | Ductile Iron |
| Gas Source Pressure | 0.6-0.8MPa |
| Salt Spray Test Reaches | 1000 Hours |
| Slot Pitch Accuracy | Tolerance Of The Center Distance Between Two Slots Is ±0.1mm |
|---|---|
| Main Models | Golden Dragon XMQ6127Y |
| Anti-fatigue | 100,000 - Cycle Loading Test |
| Operating Temperature Range | - 40℃ To 120℃ |
| Structural Design | Double Slots |
| Packaging | Carton, Wooden Box, Custom Packaging |
|---|---|
| Temperature Resistance Range | Wide Temperature Range Adaptation |
| Maintenance Feature | No Lubrication And Maintenance |
| Fatigue Resistance | Low Elongation And Long Life |
| Impact Resistance | Elastic Composite Structure |
| Low Temperature Performance | No Jamming During Cold Start At -40℃ |
|---|---|
| Protection Level | IP67 Dustproof And Waterproof |
| Mechanical Life | ≥10⁵ Times Of Loops |
| Service Life | ≥ 20,000 Hours |
| Axle Core | 42CrMo Alloy Steel |
| Installation Compatibility | Compatible With Different Accessory Layouts Of Front/rear Overhangs |
|---|---|
| Maintenance Warning | Wear Marker Lines Are Set On The Surface Of The Wheel Hub. |
| Temperature Adaptation | Works In The Full Temperature Range From -40℃ To +120℃ |
| Material Composition | The Wheel Hub Is Made Of HT250 Gray Cast Iron. |
| Fatigue Life | After 500,000 Cycles Of Load Testing |
| Temperature Range | -40℃~125℃ Full Temperature Range Operation |
|---|---|
| Precise Matching | Specifically For King Long, Golden Dragon, Yutong Buses' Yuchai Engines |
| Bearing Configuration | Double Row Angular Contact Ball Bearing |
| Surface Treatment | Zinc Coating Thickness 8-12μm |
| Tension Range | 300-600N Dynamic Adjustment |
| Hydrogen Embrittlement Protection | After Galvanizing, Conduct Dehydrogenation Treatment At A Constant Temperature Of 200℃ For 4 Hours. |
|---|---|
| Lubrication System | Fully Synthetic Polyurea-based Lubricating Grease |
| Applicable Range | Weichai WP10/WP12 Series Engines |
| Vibration Test | 20 - 3000Hz Sinusoidal Vibration |
| Maintenance Interval | 80,000 Kilometers Or 4 Years |
| Hydrogen Embrittlement Protection | After Galvanizing, Carry Out Dehydrogenation Treatment At A Constant Temperature Of 180℃ For 3 Hours. |
|---|---|
| Working Principle | Torsion Spring Pre - Tensioning Structure |
| Material Composition | High-strength Aluminum Alloy Shell |
| Tensile Force Characteristics | Rated Tension Force 600 - 1000N |
| Fatigue Life | 1.2 Million Loop Loads |