| Salt Spray Protection | The Surface Is Coated With Electrophoretic Paint |
|---|---|
| Emergency Redundancy | Support Parallel Operation Of Dual Generators |
| Multiple Protection Mechanisms | Integrated Overvoltage Protection |
| Compliance Certification | Certified By IATF 16949 |
| Protection Level | Completely Dustproof |
| Response Speed | The Adjustment Response Time When The Belt Tightness Changes Is ≤ 0.2s |
|---|---|
| Temperature Range Adaptation | Operating In The Full Temperature Range From -40℃ To 125℃ |
| Fail-safe | The Ultimate Load Of The Wheel Body Is ≥ 1200N |
| Fatigue Life | No Cracks After 500,000 Tension Cycle Tests |
| Compliance Certification | Compliant With QC/T 729-2005 Standard |
| Insulation Strength | No Breakdown Between Contact And Coil At AC 1000V For 1 Minute |
|---|---|
| Manufacturing Process | The Contact Points Are Welded Using Cold Pressure Welding. |
| Temperature Range | Operates In The Full Temperature Range From -40℃ To 125℃ |
| Fatigue Life | Mechanical Durability: 500,000 Times |
| Process Precision | Contact Gap Tolerance ±0.02mm |
| Overload Protection | Automatically Relieve Pressure When The Air Pressure Exceeds 1MPa |
|---|---|
| Main Airbag Module | Provide Seat Suspension And Shock Absorption Function |
| Structural Strength | The Overall Design Load-bearing Capacity Is ≥ 200kg |
| Manual Adjustment | Control Knobs Are Set On The Side Of The Seat. |
| Lumbar Support Airbag | Made Of Medical-grade TPU Material |
| Temperature Range Adaptation | Operates In The Full Temperature Range From -26℃ To 204℃ |
|---|---|
| Installation Requirements | Recommended Installation Pressure: 5-8kN |
| Durability | After 500,000 Reciprocating Motion Tests |
| Lubrication Compatibility | Compatible With GL-5 Grade Gear Oil |
| Environmental Compliance | Heavy Metal Content ≤ 0.01% |
| Fatigue Life | Tested Under Simulated Working Conditions For More Than 1 Million Times |
|---|---|
| Precision Manufacturing | The Precision Control Of Knurling And Threading Is Within ±0.05mm |
| Surface Treatment | Anti-corrosion Phosphating And Oil Immersion |
| Material | High-quality Alloy Structural Steel |
| ConMet Original Factory Warranty | 3 Years Or 500,000 Kilometers |
| Service Life | ≥800,000 Opening And Closing Cycles |
|---|---|
| Configuration | Front Door Opens. Rear Door Opens. |
| Anti-pinch Protection Function | Air Pressure Feedback Sensor |
| Drive Form | Single-cylinder Linkage Type |
| Speed Regulation Function | Two-way Throttle Valve |
| Corrosion Resistance | Salt Spray Test For 1000 Hours |
|---|---|
| Fast Charging Mode | Flow Rate ≥ 250L/min |
| Slow Charging Mode | Flow Rate ≤ 50L/min |
| Valve Body | Aluminum Alloy |
| Traffic | ≤30L/min |