| Rated Working Pressure | Adjustable According To Vehicle Type And Load |
|---|---|
| Rubber Composite Materials | Natural Rubber + Synthetic Rubber |
| Vehicle Model Adaptation | Commercial Vehicles |
| Fatigue Life | ≥300 Million Cycles |
| Installation Method | Bolt-fixed Type |
| Temperature Adaptation | Operating In The Full Temperature Range From -40℃ To 85℃ |
|---|---|
| Environmental Design | Dacromet Coating Does Not Contain Hexavalent Chromium |
| Material Composition | Adopt Q345B Low-alloy High-strength Steel |
| Shock Resistance | Can Withstand 100g Half-sine Wave Impact |
| Vibration Test | Pass The 5-2000Hz Random Vibration Test |
| Packaging | Carton, Wooden Box, Custom Packaging |
|---|---|
| Structural Design | Precision Gear And Rack Transmission |
| Lubrication Method | Long-term Grease Lubrication |
| Materials | High-strength Steel Shell |
| Model | Steering Gear Assembly |
| Packaging | Carton, Wooden Box, Custom Packaging |
|---|---|
| Wear Resistance | Wear Amount ≤0.1mm/100,000 Times. |
| Sphere Material | High-strength Vulcanized Rubber |
| Accessory Type | Stabilizer Bar Components |
| Model | Stabilizer Bar Bushing |
| Function | Precisely Detect The Vehicle Speed |
|---|---|
| Installation Location | Beside The Gearbox |
| Precision | Relatively High |
| Type | Hall Type |
| Voltage | 6.5 - 16V |
| Shell | ADC6 Aluminum Alloy |
|---|---|
| Built-in | Heating Module |
| Lifespan | Long-life Design |
| Wide Temperature Operating Range | -40℃~+85℃ |
| Heat | Intelligent Temperature Control |
| Physical Properties | High Hardness |
|---|---|
| Material | Alloy Cast Iron |
| Temperature Resistance Range | -40℃~+150℃ |
| Dynamic Sealing Pressure | 0.2-0.5MPa |
| Salt Spray Test | 1000 Hours |
| Regulatory Function | Wind Speed Adjustment |
|---|---|
| Stability | The Signal Is Stable |
| Texture | Smooth, Frosted |
| Control Range | Applicable Area |
| Style | Minimalist Style |
| Packaging | Carton, Wooden Box, Custom Packaging |
|---|---|
| Material | NBR (acrylonitrile-butadiene Rubber) |
| Model | Guide Arm Bushing/rubber Bearing |
| Replacement Period | 80,000 - 100,000 Kilometers |
| Skeletal Material | Q235 Galvanized Steel |
| Lubrication Design | Automatic Lubricating Mechanism |
|---|---|
| Maintenance Cost | The Pump Sleeve Can Be Replaced. |
| Technical Certification | WABCO Global Standards |
| Product Model | 1604-00868 9700516080 |
| Sealing Technology | New Type Exhaust Valve |