| Quality Standards | Strictly Follow ISO/TS 16949 |
|---|---|
| Durability | More Than 100,000 Times |
| Type | Pull - Type Shift Fork |
| Accessory Type | Clutch Release Fork |
| Thickness | 20 - 30mm |
| Apply To | - From The Frigid Zone Of - 40℃ To The High - Temperature Area Of 55℃ |
|---|---|
| Environmental Protection Design | The Materials Can Be 100% Recycled. |
| Lightweight | Aluminum Alloy Shell |
| Support | 1.2 - 1.5L Fuel Filling |
| Tensile Strength | ≥260MPa |
| Temperature Adaptation | -40℃ Low-temperature Startup Without Jamming |
|---|---|
| Salt Spray Test | 96 Hours Without Red Rust |
| Dust Cover Fixing | 65Mn Spring Snap Ring |
| Extended Maintenance Cycle Without Lubrication | 100,000 Kilometers |
| Dimensional Accuracy | Ra≤0.8μm |
| Compressive Strength | Work Pressure 0.8 - 1.2MPa |
|---|---|
| Volume Parameters | Total Volume 5.5L |
| Service Life | ≥12000 Hours |
| Pressure Drop | ≤0.05MPa |
| Air Pressure Test Leakage Volume | ≤0.5ml/min |
| Power | Low Energy Consumption |
|---|---|
| Heating | Rapid Temperature Rise |
| Shell | Corrosion Resistance |
| Maintenance | Maintenance-free |
| Movement | All Copper Material |
| Pass; Adopt; Approve | 10 - 500Hz Swept - Frequency Vibration Test |
|---|---|
| Adopt | 304 Stainless Steel Stamping Valve Core |
| The Lifespan Reaches | More Than 500,000 Times |
| Support | Dual-coil Control |
| Electromagnetic Interference Resistance | CLASS Level 5 |
| Stability | Maintain The Stability Of The Vehicle Body Posture |
|---|---|
| Durability | After 1 Million Cycles Of Fatigue Testing |
| Carrying Capacity | Load - Bearing Capacity Of Over 5 Tons |
| Vehicle Model Adaptation | Youth Neoplan JNP6126, Etc. |
| Stiffness Characteristics | Variable Stiffness Design |
| Applicable Vehicle Models | Dongfeng Tianlong, Suzhou King Long, Yutong Bus |
|---|---|
| Durability | After More Than 100,000 Fatigue Tests |
| Regulatory Function | Adjustable Pedal Angle |
| Installation Method | Screw Connection |
| Material Of The Brake Valve | Aluminum Alloy |
| The Light Intensity Meets The Standard. | The Luminous Intensity Of The Reference Axis Is ≥ 2cd |
|---|---|
| Luminous Efficiency | Photoelectric Conversion Efficiency ≥ 85lm/W |
| Light Source Type | Using 5730 Packaged Red LED Lamp Beads |
| Response Speed | LED Lighting Response Time ≤ 10ms |
| Light-transmitting Cover Design | High Light Transmittance PC Mask |
| Durability | High-quality Bearings And High-temperature Grease Ensure Long Life (TM Series Is Designed To Last 100,000 Hours) |
|---|---|
| Voltage | 24V/28V Dual Compatibility |
| Control Method | Digital Intelligent Control |
| Signal Input | PWM Speed Regulation |
| Thermal Deformation Coefficient | Low Recession Design |