| Maintain Features | Maintenance - Free Design |
|---|---|
| Vehicle Model Adaptation | Cover Large Buses |
| Fatigue Life | GB/T 13061-2017 |
| Carrying Capacity | 1.5 KN - 6.5 KN |
| Material | Rubber Air Bag |
| Anti - Error Installation Identification | The End Face Of The Framework Is Engraved With Installation Direction Arrows. |
|---|---|
| Lightweight Design | The Framework Adopts A Hollow Stamping Process |
| Double - Lip Seal | Main Lip To Prevent Oil Leakage |
| Maintenance - Free Design | Long - Life Rubber Formula |
| Weather Resistance And Anti-aging | Anti-UV Coated Rubber |
| Shell | ADC6 Aluminum Alloy |
|---|---|
| Built-in | Heating Module |
| Lifespan | Long-life Design |
| Wide Temperature Operating Range | -40℃~+85℃ |
| Heat | Intelligent Temperature Control |
| Intelligent Sleep | The Vehicle Automatically Enters Sleep Mode After Being Stationary For 15 Minutes. |
|---|---|
| Communication Specifications | Operating In The 433.92±0.05MHz SRRC Approved Frequency Band |
| Alarm Response | The Response Time For Rapid Air Leakage Detection Is ≤ 5 Seconds |
| Material Technology | The Shell Is Made Of PA66 + 30% Glass Fiber Reinforced Material |
| Protection Level | Sensor Body IP6K9K Dustproof And Waterproof |
| Temperature Adaptation | Operating In The Full Temperature Range From -40℃ To 85℃ |
|---|---|
| Environmental Design | Dacromet Coating Does Not Contain Hexavalent Chromium |
| Material Composition | Adopt Q345B Low-alloy High-strength Steel |
| Shock Resistance | Can Withstand 100g Half-sine Wave Impact |
| Vibration Test | Pass The 5-2000Hz Random Vibration Test |
| Rated Working Pressure | Adjustable According To Vehicle Type And Load |
|---|---|
| Rubber Composite Materials | Natural Rubber + Synthetic Rubber |
| Vehicle Model Adaptation | Commercial Vehicles |
| Fatigue Life | ≥300 Million Cycles |
| Installation Method | Bolt-fixed Type |
| Physical Properties | High Hardness |
|---|---|
| Material | Alloy Cast Iron |
| Temperature Resistance Range | -40℃~+150℃ |
| Dynamic Sealing Pressure | 0.2-0.5MPa |
| Salt Spray Test | 1000 Hours |
| Packaging | Carton, Wooden Box, Custom Packaging |
|---|---|
| Structural Design | Precision Gear And Rack Transmission |
| Lubrication Method | Long-term Grease Lubrication |
| Materials | High-strength Steel Shell |
| Model | Steering Gear Assembly |
| Lubrication Design | Automatic Lubricating Mechanism |
|---|---|
| Maintenance Cost | The Pump Sleeve Can Be Replaced. |
| Technical Certification | WABCO Global Standards |
| Product Model | 1604-00868 9700516080 |
| Sealing Technology | New Type Exhaust Valve |
| Length | L=250mm,L=275mm |
|---|---|
| Shaft Diameter | Φ35mm,Φ40mm |
| Damping Coefficient | 10~12N・s/mm |
| Base Material | 40Cr Alloy Steel |
| Critical Speed | ≥8000r/min |