| Quality Commitment | Inspection One By One, With A Pass Rate Of 100% (supporting Attached Inspection Reports) |
|---|---|
| Packaging | Carton, Wooden Box, Custom Packaging |
| Low-temperature Starting Performance | -20℃ Cold Friction Coefficient ≥ 0.3 |
| Wear Rate | ≤0.3mm / Ten Thousand Times |
| Material Type | Ceramic Composite Sheet |
| Crankshaft Material | 40Cr High Frequency Quenching |
|---|---|
| Applicable Scenario | Bus Air Conditioning System |
| Accessory Type | Air Conditioner Compressor |
| Sealing Technology | Laser Welding + O-ring |
| Packaging | Foam, Carton |
| Long Life And Durability | Adopting High-quality Lamp Beads, The Service Life Can Reach More Than 50,000 Hours. |
|---|---|
| High Brightness Lighting | Ensure Sufficient Lighting In The Carriage To Meet The Needs Of Reading And Passage. |
| Multicolor Ambient Light | Support Single-color Or Gradient Mode To Create A Comfortable Atmosphere. |
| Soft And Not Dazzling | Adopt Warm Light Or Soft Light Design To Protect Passengers' Eyesight. |
| Low Power Consumption Design | Reduce Vehicle Energy Consumption And Improve Cruising Range. |
| Load Type | Compatible With DC Motor / Permanent Magnet Motor |
|---|---|
| Packaging Process | Moisture-proof Silicone Potting |
| Rain Sensor Adaptation | Support External Sensors |
| Applicable Scenario | Bus Electrical Appliance |
| Shell Material | PA66 Fireproof Plastic |
| Disassemble | Simple Disassembly Structure For Convenient Regular Cleaning And Maintenance. |
|---|---|
| Protection | All-round Wrapping Effectively Blocks The Invasion Of Sediment And Stones. |
| Installation | Snap-on Design, No Tools Required, Quick Installation. |
| Quality Commitment | Inspection One By One, With A Pass Rate Of 100% |
| Model | 2931-01010 2931-01010G |
| Spring Material | 60Si2MnA Alloy Steel |
|---|---|
| Diaphragm Fatigue Life | 500,000 Loops Without Damage |
| Diaphragm Material | Nitrile Rubber Composite Fabric |
| Certification Standards | ISO 9001/GB 12676 |
| Environmental Temperature Range | -40℃~+85℃ |
| Anti-corrosion Treatment | Anodizing + Electrophoretic Coating |
|---|---|
| Sealed Structure | Double-layer Fluororubber O-ring |
| Main Materials | Aviation-grade Aluminum Alloy |
| Connecting Thread | M14×1.5/M16×1.5/M18*1.5 |
| Certification Standards | IATF 16949/QC/T 771-2017 |
| Cycle Life | 50,000 - 100,000 Repetitions Of Opening And Closing |
|---|---|
| Temperature Range | - From -40℃ To 85℃ |
| Itinerary | 10mm - 20mm |
| Good Compatibility | Various Buses |
| Shell | Metal/Plastic |
| Function | Precisely Detect The Vehicle Speed |
|---|---|
| Installation Location | Beside The Gearbox |
| Precision | Relatively High |
| Type | Hall Type |
| Voltage | 6.5 - 16V |
| Surface Hardness | HRC58-62, Wear Resistant. |
|---|---|
| Flow Characteristics | Nominal Diameter Φ6mm |
| Service Life | ≥5 Years / 150,000 Cycles |
| Accessory Type | Pneumatic Accessories |
| Material Composition | 42CrMo Alloy Steel |