This OEM genuine inner bearing is the load carrying element of the rear wheel end on Yutong coaches and city buses. It is a matched taper roller set, cone and cup supplied together, produced to the original specification so it seats correctly on the axle journal and inside the hub bore without shimming or modification.
A rear wheel bearing carries the full weight of the vehicle on one side plus the cornering load, so it is one of the few chassis parts where a low grade copy is never worth the saving. Poor steel cleanliness or a soft raceway leads to pitting, then noise, then play in the wheel, and finally a seized hub at the roadside with a damaged spindle. This bearing is made from GCr15 (100Cr6 / SUJ2) bearing steel, hardened to 60-64 HRC, with a ground and superfinished raceway so the rollers run on a smooth, stable surface for their whole service life.
| Product Type | Rear wheel hub inner bearing, taper roller set |
| Part Number | DG-YT-RWB-I |
| Bearing Steel Grade | GCr15 (100Cr6 / SUJ2) |
| Raceway Hardness | 60-64 HRC |
| Precision Grade | P6, P0 available |
| Structure | Single row taper roller, matched cone and cup |
| Cage Material | Pressed steel cage |
| Seal Type | Open or double lip seal version |
| Lubrication | Grease or gear oil, pre-greased option |
| Operating Temperature | -30 C to 120 C |
| Vehicle Application | Yutong coach and city bus rear wheel end |
| Service Life | Over 100,000 km under normal load |
| Condition | Brand new, OEM genuine |
| Warranty | 12 months |
Because bearing size is defined by the axle and hub, not by the bus model alone, always send the bearing number stamped on the old part, or the axle nameplate photo together with the VIN. We will match the exact bore, outer diameter and width before shipment.
We supply chassis, transmission and body parts for fleet operators, repair workshops and distributors. Wheel end parts are consumed continuously by any workshop that services Yutong buses, so we keep stock of the fast moving bearing sizes and can ship small trial orders together with your other part numbers in one consolidated shipment. Every bearing is checked for clearance and finish before it leaves the warehouse.
Q: Is the bearing supplied as a set with the cup?
A: Yes, cone and cup are matched and supplied together as one set, so you do not need to order them separately.
Q: How do I confirm the correct size?
A: Send the bearing number stamped on the old bearing, or the inner bore, outer diameter and width measurement. We will confirm the matching part.
Q: Can you supply the complete wheel end kit?
A: Yes. We can quote the inner bearing, outer bearing, hub seal and lock nut together so the workshop has everything for one overhaul.
Send us your bearing numbers and quantity, and we will reply with the latest price and freight cost within one working day.
Overall Rating
Rating Snapshot
The following is the distribution of all ratingsAll Reviews