This small type solenoid valve controls the air flow of the pneumatic door pump on Yutong coaches, city buses and school buses. It replaces the original door pump solenoid switch and restores normal open and close action, including the anti-jam and slow-close behaviour controlled by the door pump unit.
The door pump solenoid valve works in a hard environment: constant pressure cycling, moisture from the air line, road vibration and a coil that stays energised while the door is held open. Most door failures on older buses trace back to this small part, either a burned coil from over-voltage, a swollen NBR seal causing internal leakage, or a sticking spool that makes the door creep instead of closing firmly.
This valve is built for that duty. The coil is encapsulated and sealed to IP65 so moisture and splash cannot reach the winding. The body is anodised aluminium with a hard, corrosion resistant surface, and the spool runs in a honed bore with nitrile seals that keep their elasticity across the full working temperature range. Ports are G1/8 as standard, with M10 x 1.25 available for other door pump models.
| Product Type | Pneumatic door pump solenoid valve, small type |
| Part Number | DG-DPV-S |
| Rated Voltage | 24V DC, 12V available |
| Coil Power | 8W |
| Working Pressure | 0.4-0.8 MPa |
| Port Size | G1/8, M10 x 1.25 available |
| Valve Type | 2 position 3 way, normally closed |
| Body Material | Anodised aluminium alloy |
| Seal Material | NBR nitrile rubber |
| Protection Class | IP65 encapsulated coil |
| Response Time | 0.1 second |
| Operating Temperature | -20 C to 80 C |
| Working Medium | Filtered dry compressed air |
| Service Life | 1,000,000 cycles |
| Vehicle Application | Yutong coach, city bus, school bus door pump |
| Condition | Brand new, OEM genuine |
| Warranty | 12 months |
Door pump models vary by body builder and production year. Please send a photo of the old valve showing the port size, coil label and connector, and we will confirm the matching type before shipment.
We supply body electrical and pneumatic parts for fleet operators, bus body shops and distributors. Door pump valves are a steady consumption item for any workshop maintaining Yutong buses, so we hold stock of the common small type and can consolidate them with bearings, switches and lights in one shipment to reduce freight cost. Coil resistance, sealing and switching are checked on every piece before packing.
Q: My door creeps slowly instead of closing firmly. Is the valve the cause?
A: Usually yes. A swollen or worn seal lets air pass internally so the door moves slowly. Replacing the solenoid valve normally restores normal closing speed.
Q: Do you supply both 12V and 24V versions?
A: Yes, 24V DC is standard for these buses and 12V DC is available for other applications. Please state the voltage when ordering.
Q: Can you supply other door pump parts?
A: Yes. We also supply door pump cylinders, seals, emergency valves and door control switches, so you can order a complete repair kit in one shipment.
Send us the valve photo and quantity, and we will reply with the latest price and freight cost within one working day.
Overall Rating
Rating Snapshot
The following is the distribution of all ratingsAll Reviews