This rotating shaft hinge is the standard hinge used on bus side luggage compartment doors, wheel arch covers and cooling pack access doors. It is a direct replacement for the original Yutong hinge and also fits most coach, city bus and school bus bodies that use the same 12mm pin layout.
Side compartment doors are opened and closed several times a day at every terminal, and they are loaded with luggage, so the hinge takes both a rotation load and a side load. A cheap hinge shows its weakness quickly: the pin wears oval, the door drops a few millimetres and starts to rub the body, and the loose fit rattles at speed and lets water into the luggage bay.
This hinge uses a 304 stainless steel pin running in a nylon bushing inside a zinc plated steel bracket. The stainless pin does not corrode in wet weather or after road salt exposure, the nylon bushing keeps the swing smooth and removes metal to metal rattle, and the zinc plated bracket with passivation holds up to 72 hours of salt spray without red rust. The result is a door that still aligns with the body after years of daily use.
| Product Type | Side compartment door hinge, rotating shaft type |
| Part Number | DG-BH-RS |
| Material | 304 stainless steel pin, zinc plated steel bracket |
| Pin Diameter | 12mm, 10mm and 14mm available |
| Hinge Length | 60mm, 80mm, 100mm, 120mm available |
| Opening Angle | 180 degrees |
| Bushing | Nylon anti-rattle bushing |
| Surface Treatment | Zinc plated with anti-corrosion passivation |
| Mounting | Welded or bolted, 2 or 3 hole flange |
| Load Capacity | 40 kg per pair |
| Salt Spray Test | 72 hours, no red rust |
| Operating Temperature | -30 C to 90 C |
| Vehicle Application | Luggage door, wheel arch cover, cooling pack door |
| Condition | Brand new, OEM genuine |
| Warranty | 12 months |
Hinge length and hole spacing differ between body builders and production years. Send us a photo of the old hinge next to a ruler, or the centre to centre hole distance, and we will confirm the correct length and pin diameter.
We supply body hardware, lighting and chassis parts for bus body shops, fleet operators and distributors. Hinges, latches and rubbers are ordered in bulk by every body shop, so we keep stock of the common sizes and can ship a mixed carton with your other part numbers in one consolidated order. Each batch is checked for pin fit, bushing play and plating thickness before packing.
Q: Can this hinge be welded onto the door frame?
A: Yes, the zinc plated bracket can be welded or bolted. If you weld it, we recommend a small area of plating removal at the weld point and a zinc rich touch up afterwards.
Q: My door rattles when the bus is moving. Will a new hinge fix it?
A: In most cases yes. The rattle usually comes from a worn pin and flattened bushing. Replacing the hinge pair restores the tight fit and the door alignment.
Q: Do you supply the matching latch and rubber seal?
A: Yes. We can quote compartment door latches, lock cylinders and EPDM door seals together with the hinges as one body hardware order.
Send us the hinge photo, length and quantity, and we will reply with the latest price and freight cost within one working day.
Overall Rating
Rating Snapshot
The following is the distribution of all ratingsAll Reviews