| Mainstream Adaptation | Qijiang QJ805, S6-150, 5S-111GP And Other Transmissions |
|---|---|
| Dynamic Fatigue Load | 8kN Alternating Load Cycles 1 Million Times |
| Rotational Flexibility | Circular Swing Angle ±30° |
| Special Vehicle Models | Support Customization |
| Base Material | 40Cr Alloy Steel |
| Special Vehicle Models | Support Customizing The Diameter Of The Ball Head And The Length Of The Rod Part |
|---|---|
| Special Coating | Molybdenum Disulfide Dry Film Lubricating Coating |
| Spherical Gap | Axial Right - Angled Direction 0.025~0.065mm |
| Applicable Oils And Fats | Lithium-based Molybdenum Disulfide Grease |
| Thread | Right-hand Thread (R), Left-hand Thread (L) |
| Quality Standards | Strictly Follow ISO/TS 16949 |
|---|---|
| Durability | More Than 100,000 Times |
| Type | Pull - Type Shift Fork |
| Accessory Type | Clutch Release Fork |
| Thickness | 20 - 30mm |
| Installation Location | Located In The Engine And Transmission |
|---|---|
| Interface | General Standards For Easy Installation. |
| Surface Treatment | Quenching, Hard Chromium Plating |
| Maintenance Cost | The Pump Sleeve Can Be Replaced. |
| Control | Internal And External Dual Modes |
| Functional Features | Accurately Control The Separation And Engagement Of The Clutch |
|---|---|
| Lubrication Requirements | Need To Be Lubricated Regularly |
| Surface Treatment | High - Frequency Quenching |
| Intensity | Relatively High |
| Hardness | 48 - 58HRC |
| Temperature Range Adaptation | Operates In The Full Temperature Range From -26℃ To 204℃ |
|---|---|
| Installation Requirements | Recommended Installation Pressure: 5-8kN |
| Durability | After 500,000 Reciprocating Motion Tests |
| Lubrication Compatibility | Compatible With GL-5 Grade Gear Oil |
| Environmental Compliance | Heavy Metal Content ≤ 0.01% |
| Intermittent Frequency Adjustable | The Intermittent Gear Of The Windshield Wipers Supports Stepless Adjustment From 3 To 15 Times Per Minute. |
|---|---|
| Environmental Adaptation | Stable Operation In The Full Temperature Range From -40℃ To 85℃ |
| Contact Resistance | The Contact Resistance Of The Core Contact Point Is ≤ 50mΩ |
| Insulation Performance | The Insulation Resistance Of The Switch Body Is ≥ 100MΩ |
| Warranty Service | Provide A 1-year / 100,000-kilometer Quality Guarantee |
| Work In The Full Temperature Range | Stable Operation In An Environment Ranging From -40℃ To 85℃ |
|---|---|
| Pressure Drop Control | Initial Pressure Drop At Rated Air Volume ≤ 2kPa |
| Quality System | Produced By IATF 16949 Certified Factories |
| Precise Matching | Original Factory Number 1109-08269 |
| Dust Holding Capacity | Static Dust Holding Capacity ≥ 300g |
| Normal Use | Mechanical Life ≥ 8 Years Or 1,000,000 Kilometers |
|---|---|
| Applicable Vehicle Models | Adapt To Eaton Automatic Transmission |
| Operation Interface | Adopt Button Combination Design |
| Protection Level | IP65, Dustproof And Waterproof |
| Lightweight Design | Total Weight ≤ 500g |
| Shell Structure | High-strength Aluminum Alloy Die-cast Housing |
|---|---|
| Control Signal | CAN Bus Communication |
| Drive Unit | Dual DC Servo Motors |
| Operating Temperature | -40℃~+85℃ |
| Original Factory Part Number | 4306479 |