| Accessory Type | Engine-driven Double-acting Vane Type Power Steering Oil Pump |
|---|---|
| Engine Adaptation | Designed Specifically For Weichai WP10 Series Diesel Engines |
| Driving Mode | Front-end Wheel Train Spline Shaft Drive Of The Engine |
| Protection Level | IP65 Dustproof, Oilproof And Waterproof |
| Original Factory Code | 612600130476 |
| Performance | Long Lifespan And Stable Operation |
|---|---|
| Adapt To Weichai | WP10、WP12、WP13 |
| Operating Temperature | -40℃~+125℃ |
| System Certification | ISO/TS16949 |
| Measurement Accuracy | ±0.5% FS |
| Brand Ownership | Yuchai (YUCHAI) Original Factory Matching Starter Assembly |
|---|---|
| Protection Level | IP54 Rating For Dustproof, Waterproof And Oilproof |
| Accessory Type | Planetary Deceleration Starter Assembly |
| Implementation Standard | Compliant With QC/T 731-2019 |
| Electrical Performance Parameters | No-load Speed ≥ 5000rpm |
| Core Adaptation Parameters | Designed Specifically For Yuchai YCS04 Series 4-cylinder China 6 Diesel Engines |
|---|---|
| Operating Temperature Range | Stable Operation Over A Wide Temperature Range Of -40℃ To +150℃ |
| Safety And Environmental Protection Features | High-efficiency Labyrinth-type Oil-gas Separation Structure |
| Noise Reduction And Heat Insulation Design | Built-in Noise Reduction And Shock Absorption Structure |
| Interface Specification | Integrated Original Specification Oil Filler Cap |
| Low-temperature Startup | -40℃ Cold Start Without Jamming |
|---|---|
| Apply To | Buses, Yuchai, Weichai Engines |
| Installation Method | Flange Installation |
| Brush Life | ≥5000 Hours |
| Continuous Working Rotational Speed | ≤8000r/min |
| Temperature Adaptation | Works Normally In The Full Temperature Range From -40℃ To 120℃ |
|---|---|
| Bearing Material | Made Of 42CrMo Alloy Steel Through Integral Forging |
| Size Specifications | Kingpin Adaptation Diameter φ52mm±0.02mm |
| Installation Optimization | Bushing Tape With 1:50 Taper Guide Section |
| Accuracy Class | Bearing Radial Clearance 0.015-0.03mm |
| Service Life | Recommended Replacement Cycle: 5,000-10,000 Kilometers Or Half A Year |
|---|---|
| Dual-valve Design | Built-in Check Valve + Bypass Valve Dual Protection Structure |
| Check Valve Function | Prevent Engine Oil From Flowing Back After The Engine Stalls |
| Engine Oil Protection | Effectively Extend The Service Life Of Engine Oil |
| Quality Assurance | Weichai Official "Three Guarantees" Service |
| Core Structure Design | Integrated Structure Of Wave Spring Plate + Steel Plate Body + LUK Double-sided Friction Plate + Three-stage Torsional Damper |
|---|---|
| Universal Replacement Adaptation | Can Directly Replace Driven Discs Of The Same Specification φ430 Such As 1601-00730A And 1601-00729 |
| Core Friction Properties | Adopts LUK Original Factory's Exclusive Asbestos-free Environmentally Friendly Friction Formula |
| Operating Temperature Range | Stable Operation In A Wide Temperature Range Of -40℃ To +180℃ |
| Friction Plate Forming Process | LUK's Exclusive High-temperature Hot-press Curing Process |
| Core Structure Design | Integrated Structure Of Double-row Angular Contact Ball Bearings |
|---|---|
| Core Material Composition | High-purity Bearing Steel GCr15 Rings And Steel Balls |
| Durable And Reliable Characteristics | Maintenance-free Design For The Entire Service Life |
| Installation Matching Specifications | Integrated Sleeve Embedded Installation |
| Implementation Standards | Complies With QC/T 303-2018 |
| Core Dimension Specifications | Standard Nominal Diameter Φ395mm |
|---|---|
| Brand Ownership | Suitable For EATON Fuller |
| Parameters Of The Damping System | Three-stage Graded Torsional Damping Structure |
| Operating Temperature Range | Stable Operation In A Wide Temperature Range Of -40℃ To +180℃ |
| Core Material Composition | High Wear-resistant Non-asbestos Environmentally Friendly Friction Material |