| Brush Wear Amount | ≤0.1mm / Thousand Hours |
|---|---|
| Durability Test | 1000-hour Bench |
| Shell Material | 100% Recycled |
| Bearing Life | ≥8000 Hours |
| Voltage | 14V80A |
| Low-temperature Startup | -40℃ Cold Start Without Jamming |
|---|---|
| Apply To | Buses, Yuchai, Weichai Engines |
| Installation Method | Flange Installation |
| Brush Life | ≥5000 Hours |
| Continuous Working Rotational Speed | ≤8000r/min |
| Temperature Adaptation | Works In The Full Temperature Range From -40℃ To 120℃ |
|---|---|
| Material Composition | The Rod Body Is Forged From 40Cr Alloy Structural Steel. |
| Size Specifications | Center 137mm±0.5mm, Rod Diameter 20mm |
| Vibration Test | Pass The 10-2000Hz Random Vibration Test |
| Fatigue Life | After 200,000 Cycles Of Load Testing |
| Temperature Adaptation | Works Normally In The Full Temperature Range From -40℃ To 120℃ |
|---|---|
| Bearing Material | Made Of 42CrMo Alloy Steel Through Integral Forging |
| Size Specifications | Kingpin Adaptation Diameter φ52mm±0.02mm |
| Installation Optimization | Bushing Tape With 1:50 Taper Guide Section |
| Accuracy Class | Bearing Radial Clearance 0.015-0.03mm |
| Material Technology | High-strength Cast Iron Main Body + Precision Steel Shaft Core |
|---|---|
| Original Factory Adaptation | Xiamen King Long Coach (Golden Dragon XML Series) |
| Mute Design | The Wheel Groove Adopts A Special Arc Design |
| Security Guarantee | Double Sealing Structure |
| Applicable Temperature Range | -40℃ To +120℃ |
| E | Ground Terminal, Connected To The Vehicle Body Or Engine Housing |
|---|---|
| Shell | High-temperature Resistant Flame-retardant Plastic |
| F | Connect The Excitation Winding Of The Generator |
| B+ | Connect The Positive Pole Of The Battery |
| High-precision Control | Voltage Regulation Accuracy ≤ ±0.2V |
| Response Speed | The Response Time From Pressing The Pedal To The Establishment Of Pressure Is ≤ 0.2s |
|---|---|
| Vehicle Model Adaptation | Specifically For Ankai HFF6120, HFF6850, HFF6900 Series Buses |
| Piston Process | Hard Chromium Plating On The Surface |
| Oil Temperature Adaptation | Operating Temperature -40℃ To 120℃ |
| Cylinder Block Material | Using ADC12 Die-cast Aluminum Alloy |
| Compliance Certification | Certified By ISO/TS16949 Automotive Industry Quality Certification |
|---|---|
| Warranty Period | SKF Original Factory 18-month / 200,000-kilometer Warranty |
| Anti-corrosion | Dacromet Coating On The Outer Ring Surface |
| Service Life | Design Life ≥ 800,000 Kilometers |
| Material Technology | Bearing Steel (GCr15) Material |
| Performance | Long Lifespan And Stable Operation |
|---|---|
| Adapt To Weichai | WP10、WP12、WP13 |
| Operating Temperature | -40℃~+125℃ |
| System Certification | ISO/TS16949 |
| Measurement Accuracy | ±0.5% FS |
| Brand Ownership | Yuchai (YUCHAI) Original Factory Matching Starter Assembly |
|---|---|
| Protection Level | IP54 Rating For Dustproof, Waterproof And Oilproof |
| Accessory Type | Planetary Deceleration Starter Assembly |
| Implementation Standard | Compliant With QC/T 731-2019 |
| Electrical Performance Parameters | No-load Speed ≥ 5000rpm |