| High Load Capacity | Maximum Bearing Torque Is 200 N·m And Is Suitable For Large-displacement Engines. |
|---|---|
| High Temperature Resistant Seal | Fluororubber Oil Seal, Capable Of Withstanding High-temperature Oil At 180℃. |
| Millisecond-level Response | Adapt To Engine Speed Fluctuations And Maintain Transmission Stability. |
| Anti-corrosion Coating | Electrophoretic Treatment. Salt Spray Test For 1000 Hours Without Rust. |
| Dynamic Tension Compensation | Real-time Adjustment Of Belt/chain Tension With An Error Of ±0.5 N·m. |
| Packaging | Carton, Wooden Box, Custom Packaging |
|---|---|
| Thermal Fading | High Temperature Inhibition |
| Materials | Ceramic Composite Formula |
| Structure | High Compressive Strength |
| Maintenance | Low Dust And Easy To Clean. |
| Quality Commitment | Inspection One By One, With A Pass Rate Of 100% |
|---|---|
| Packaging | Carton, Wooden Box, Custom Packaging |
| Noise Reduction Design | Non-metallic Elastic Bushing |
| Overload Protection | Shear Pin Safety Structure |
| Accessory Type | Bus Transmission Shaft |
| Temperature Resistance Performance | Operating In A Wide Temperature Range From -40℃ To 125℃ |
|---|---|
| Speed Range | Operating Speed 600-6000r/min |
| Intelligent Adjustment | Built-in MCU Digital Regulator |
| Shell | Aluminum Alloy Die Casting |
| Electrical Performance | Rated Voltage 28V DC |
| Rated Performance | Maximum Transmission Torque Is 1280N・m, And Static Friction Torque Is ≥1800N・m |
|---|---|
| Adaptation Specifications | Designed Specifically For Eaton Automatic Transmissions |
| Composition Of Core Materials | The Driven Disc Steel Plate Is Made Of 65Mn Spring Steel |
| Friction Characteristics | Room Temperature Friction Coefficient 0.38±0.02 |
| Spline Hub Process | 20CrMnTi Carburizing And Quenching Treatment |
| Temperature Range Adaptation | Operates In The Full Temperature Range From -40℃ To 85℃ |
|---|---|
| Service Life | The Buckle Opening And Closing Cycle Is ≥ 50,000 Times |
| Static Strength | The Static Breaking Force Of The Webbing Is ≥ 22kN |
| Webbing Material | Woven From High-strength Polyester Fibers |
| Locking Parameters | Emergency Locking Acceleration ≥ 2.5g |
| Intelligent Recognition | Compatible With Halogen/LED Turn Signal Lights |
|---|---|
| Emergency Flash | Double Flash Mode Is Triggered Preferentially. |
| Packaging | Carton, Wooden Box, Custom Packaging |
| Model | Compound Electronic Flash Relay |
| Electromagnetic Compatibility | Meet CISPR 25 Class 3. |
| Accessory Type | Hydraulic Clutch Master Cylinder With Central Valve Structure |
|---|---|
| Core Structure | Central Valve + Built-in Set Screw + Guide Sleeve Piston |
| Material Composition | High-strength Cast Aluminum Cylinder Block |
| Implementation Standard | Compliant With QC/T593-2011 |
| Interface Specification | Oil Outlet M14×1.5 Thread |
| Dual Frequency Superposition | High Frequency (400-500Hz) + Low Frequency (200-300Hz) |
|---|---|
| Durability Test | Continuous Operation For 100 Hours Without Failure |
| Packaging | Carton, Wooden Box, Custom Packaging |
| Surface Galvanizing | Salt Spray Test ≥ 720 Hours |
| Voltage | 24V (wide Voltage 18-32V) |
| Power | Low Energy Consumption |
|---|---|
| Heating | Rapid Temperature Rise |
| Shell | Corrosion Resistance |
| Maintenance | Maintenance-free |
| Movement | All Copper Material |