| Optical Attenuation Control | 5000 Hours Luminous Flux Maintenance Ratio ≥95% |
|---|---|
| Packaging | Carton, Wooden Box, Custom Packaging |
| Translucent Cover | High Light Transmittance PC Material |
| Accessory Type | Lighting Accessories |
| Installation Tools | 3M Adhesive Tape |
| Adaptation | Precisely Match Various Models Of Transmissions In Qijiang. |
|---|---|
| Quality Commitment | Inspection One By One, With A Pass Rate Of 100% |
| Packaging | Carton, Wooden Box, Custom Packaging |
| Neutral Detection | Sensitive Identification Of Neutral State |
| Model | 0710207004/1156307004/0501203944 |
| Cleaning Width | 2.5 - 3.5m Adjustable |
|---|---|
| Life Span Exceeds | 25,000 Loops |
| Pressure Resistance Of The Pipeline System | >0.55MPa |
| Pipe System Pressure Resistance | >0.55MPa |
| The Water Saving Rate Reaches | 20%-30% |
| Corrosion Resistance | Salt Spray Test For 1000 Hours |
|---|---|
| Fast Charging Mode | Flow Rate ≥ 250L/min |
| Slow Charging Mode | Flow Rate ≤ 50L/min |
| Valve Body | Aluminum Alloy |
| Traffic | ≤30L/min |
| Operating Temperature Range | - From 40℃ To 80℃ |
|---|---|
| Wear-resistant Life | ≥500,000 Times |
| Reaction Time | ≤0.5 Seconds |
| Release Time | ≤0.5 Seconds |
| Work Pressure | 0.6-1.0MPa |
| Pressure Control | The Braking Pressure Can Be Precisely Controlled Within The Range Of 0-11bar. |
|---|---|
| Interface Standard | Compliant With SAE J1939 Communication Protocol |
| Valve Body Structure | Precision-machined Aluminum Alloy Shell |
| Protection Level | IP68/IP6K9K Dual Protection |
| Durability | Passed 1,000,000 Loop Tests |
| Quality Commitment | Inspection One By One, With A Pass Rate Of 100% (supporting Attached Inspection Reports) |
|---|---|
| Double Row Ball Bearing | Human-oriented, Original Factory Bearings. |
| Packaging | Carton, Wooden Box, Custom Packaging |
| Applicable Scenario | Weichai Engine |
| Model | Belt Tensioner |
| Quality Commitment | Inspection One By One, With A Pass Rate Of 100% |
|---|---|
| Packaging | Carton, Wooden Box, Custom Packaging |
| Broken Window Head Protection Cover | ABS Engineering Plastic Buckle |
| International Certification | GB 13954,CE EN 356 |
| Model | Alarm Safety Hammer |
| Material Combination | EPDM + Aramid Fiber + Galvanized Steel Plate |
|---|---|
| Packaging | Carton, Wooden Box, Custom Packaging |
| Hardness | Shao's Hardness A Is 65-75 Degrees. |
| International Certification | GB 11551+QC/T 633+IATF 16949 |
| Bench Test | 500,000 Cycles Without Cracks |
| Millisecond-level Adaptive Response | Support Dynamic Adjustment Under Complex Working Conditions Such As Cold Start Of The Engine And Rapid Acceleration. |
|---|---|
| Overspeed Protection | When The Rotational Speed Is Greater Than 6000 Rpm, Locking Is Triggered To Prevent The Tensioner Pulley From Flying Off. |
| Timing Synchronization Guarantee | Accumulated Error Is Less Than ±0.5° Crankshaft Angle To Avoid The Risk Of Knocking Caused By Valve Timing Deviation. |
| Material And Craftsmanship | Adopt QT700-2 Nodular Cast Iron. The Tensile Strength Is ≥700 MPa. The Fatigue Life Is Over 1 Million Times. |
| High-temperature Fatigue-resistant Coating | The Surface Is Sprayed With Molybdenum Disulfide (MoS₂) Dry Film, And The Friction Coefficient Is ≤0.05. |