| Size | Standard |
|---|---|
| Part Number | MK4/MK8 |
| Positioning Accuracy | ±0.5° |
| Material | Aluminum Alloy |
| Operating Temperature | -40℃~85℃ |
| Material Composition | 20CrMnTi Low-carbon Alloy Steel |
|---|---|
| Technology | Thickness Of Galvanized Coating |
| Rubber Main Body | EPDM |
| Shift Response Time | ≤0.6 Seconds |
| Radial Load Capacity | ≥80kN |
| Connection Method | The Ball Head Pin Is Tapered And Matched With The Stabilizer Bar Support. |
|---|---|
| Compatible Vehicle Models | Yutong Models Such As ZK6120H/6118Y2/6805DX |
| Wear-resistant Design | Spherical Surface Hard Chromium Plating |
| Fatigue Life | 2 Million Times Of Swing Angle Cycles |
| Structural Design | Double Ball - Head All - Metal Joint |
| Installation Hole Size | Installation Hole Diameter 48, Taper 23.5 |
|---|---|
| Accessory Type | Suspension Connecting Ball Joint |
| Corrosion Resistance | Salt Spray Test ≥ 500 Hours |
| Material Type | High-strength Alloy Steel |
| Connection Method | Threaded Connection |
| Low Battery Reminder | When The Voltage Is Less Than 2.6V, The Key Backlight Flashes. |
|---|---|
| Models Applicable To | Jinlong, Yutong, Zhongtong Buses |
| Antenna Type | Built-in FPC Flexible Antenna |
| Single Door Independent Control | Pneumatic Door Adaptation |
| General Interface | 5PIN Waterproof Terminal |
| Seal Material | Ethylene Propylene Diene Monomer Rubber |
|---|---|
| Service Life | ≥100,000 Opening And Closing Cycles |
| Surface Treatment | Powder Coating Process |
| Lock Body Type | Link - Type Side Lock |
| Main Body Material | Aluminum Alloy |
| Accessory Type | Seat Retaining Buckle - Modified Seat Bolt |
|---|---|
| Installation Method | Tool-free Quick Installation Design |
| Applicable Scenario | Cars, Buses, Trucks, Modifications |
| Anti-misoperation | Guide Positioning Groove Design |
| Applicable Models | A Full Range Of Car Seat Platforms |
| Service Life | ≥ 500,000 Times Of Opening And Closing Cycles |
|---|---|
| Bistable Design | Maintain When Powered On |
| Valve Core Material | Stainless Steel 304 |
| Installation Method | Scaffold Fixation |
| Valve Body Material | Aluminum Alloy |
| Anti - Error Installation Identification | The End Face Of The Framework Is Engraved With Installation Direction Arrows. |
|---|---|
| Lightweight Design | The Framework Adopts A Hollow Stamping Process |
| Double - Lip Seal | Main Lip To Prevent Oil Leakage |
| Maintenance - Free Design | Long - Life Rubber Formula |
| Weather Resistance And Anti-aging | Anti-UV Coated Rubber |
| Models Applicable To | Buses Such As King Long, Higer, Yutong, Etc. |
|---|---|
| Adapt | Three-speed Electromagnetic Clutch |
| Performance | Durable And Long-lasting |
| Material Properties | Bearing Steel Material |
| Structure | Double-column Angle |