| Models Applicable To | Buses Such As King Long, Higer, Yutong, Etc. |
|---|---|
| Adapt | Three-speed Electromagnetic Clutch |
| Performance | Durable And Long-lasting |
| Material Properties | Bearing Steel Material |
| Structure | Double-column Angle |
| Service Life | More Than 50,000 Open - Close Cycles |
|---|---|
| Material | High-strength Alloy |
| Structure | Four-bar Linkage |
| Connection Point | Reinforced Type |
| Temperature | - 40℃ - 80℃ |
| Alarm Methods | Acoustic And Optical Alarm |
|---|---|
| Installation Method | Threaded Connection |
| Operating Temperature | -45℃ - +90℃ |
| Barometric Pressure Measurement Range | 0 - 1.2MPa |
| Service Life | ≥8 Years |
| Type | Non-contact Hall Sensor |
|---|---|
| Temperature Range | - 40℃ - +125℃ |
| Response Frequency | Up To 1KHz |
| Operating Voltage | 6.5V - 12V |
| Vehicle Speed Measurement | Error ±1% |
| Reliability | Pass 3 Million Reliability Tests |
|---|---|
| Category | Air Suspension Components |
| Installation Method | Pipeline Connection |
| Function | Height Adjustment |
| Sealing Material | Nitrile Rubber |
| Regulatory Function | Wind Speed Adjustment |
|---|---|
| Stability | The Signal Is Stable |
| Texture | Smooth, Frosted |
| Control Range | Applicable Area |
| Style | Minimalist Style |
| Sealing Performance | Double Oil Seals + Neoprene Dust Cover |
|---|---|
| Fatigue Life | After 2.4 Million Bending Fatigue Tests |
| Connection Method | Spherical Hinge Structure |
| Surface Treatment | Galvanizing |
| The Hardness Reaches | HRC50-55 |
| Anti-fatigue Life | 200,000 - Time Torsional Fatigue Test |
|---|---|
| Steering Return To Neutral Time | <0.3 Seconds |
| High-precision Spline Connection | Adopt 79 Teeth |
| Transmission | Universal Joint Cross Head |
| Built - In | Telescopic Sleeve Mechanism |
| Function | Multifunctional Control Module For Lighting, Windshield Wipers, Steering, Etc. |
|---|---|
| Material | Flame-retardant Engineering Plastics |
| Lifespan | 600,000 Times Of Machinery |
| Conductivity | ≥105% IACS |
| Model | 3774-00211 |
| Process Optimization | Adopt Secondary Vulcanization Molding Technology |
|---|---|
| Material Composition | Using Ethylene Propylene Diene Monomer Rubber |
| Self-lubricating Design | The Inner Wall Is Sprayed With A PTFE Coating |
| Temperature Characteristics | Operating Temperature Range -40℃ To 120℃ |
| Environmental Adaptation | Passed 500-hour Ozone Aging Test |