| Convenient Maintenance | Fifteen-degree Diversion Chamfer At The Edge Of The Friction Block. |
|---|---|
| Performance Advantages | Stable Value Of Friction Coefficient: 0.45±0.03 |
| Weight Loss Advantage | Adopt ADC12 Aluminum Alloy Backplane. |
| Materials | High Temperature Ceramic Formula |
| Product Model | VIE-19.5W-3501190,WVA29126 |
| Material | Semi-metal Ceramic Composite |
|---|---|
| Product Model | WVA29126/VIE19.5W-3501190 |
| Certification Standards | ISO 26262/TS16949 |
| Service Life | ≥80,000 Kilometers |
| Size | 210.5*92.3*30 |
| Applicable Vehicle Models | Yutong / King Long And Other Buses |
|---|---|
| Service Life | ≥100,000 Kilometers |
| Size | 249.5*116.6*28.9 |
| Product Model | 3501DA05-040 |
| Minimum Braking Torque | 840N・m |
| Durability Test | 500,000 Loops Without Leakage |
|---|---|
| Certification Standards | ISO 9001/GB 12676 |
| Material | Cast Iron HT250 |
| Installation Method | Threaded Type |
| Sealing Material | Nitrile Rubber |
| Fatigue Life | 1 Million Times Of Loop Loading |
|---|---|
| Disassembly Tools | 33mm Hexagonal Socket |
| Certification Standards | ISO 898-1/IATF 16949 |
| Install Torque | 280~320N・m |
| Temperature Range | -50℃~+150℃ |
| Vibration Test | 10 - 2000Hz Sinusoidal Vibration |
|---|---|
| Locking Torque | Rated Locking Torque ≥ 800N·m |
| Lubrication System | Food - Grade Silicone Grease |
| Material Composition | Aluminum Alloy Housing |
| Sealed Structure | Double - Lip Seal Design |
| Compatible Vehicle Models | Yutong Models Such As ZK6120H/6118Y2/6805DX |
|---|---|
| Storage Conditions | Dry And Light - Avoiding Environment |
| Fatigue Life | 1 Million Times Of Swing Angle Cycles |
| Structural Design | Double-ball Seat All-metal Joint |
| Disassembly Tools | 27mm Plum Blossom Wrench |
| Pressure Characteristics | Turn On The Pressure Deviation ≤ ±0.3 Bar |
|---|---|
| Certification Standards | QC/T 29105+ IATF 16949:2016 |
| Sealing System | Double - Lip Sealing Structure |
| Structural Design | Spring-loaded Plunger Valve |
| Lubrication System | Lithium-based Grease Filling |
| Length | L=250mm,L=275mm |
|---|---|
| Shaft Diameter | Φ35mm,Φ40mm |
| Damping Coefficient | 10~12N・s/mm |
| Base Material | 40Cr Alloy Steel |
| Critical Speed | ≥8000r/min |
| Package | Wrapped With Rust-proof Paper + Sealed With Polyethylene Bag |
|---|---|
| Wading Conditions | The Surface Is Sprayed With A Polytetrafluoroethylene Coating. |
| Torque Requirements | The Tightening Torque Of The Installation Bolt Is 80 - 100N·m |
| Size | Outer Diameter Φ85mm × Height 130mm |
| Anti-corrosion Coating | Metal Skeleton Cathodic Electrophoresis |