| Shift Response Time | ≤0.6 Seconds |
|---|---|
| Material Composition | 20CrMnTi Low-carbon Alloy Steel |
| Size Specifications | Kingpin Adaptation Diameter φ52mm±0.02mm |
| Dedicated | Brake Wheel Cylinder |
| Working Frequency | 315MHz |
| Working Frequency | 315MHz |
|---|---|
| Sealing Parts | Nitrile Rubber |
| Technology | Thickness Of Galvanized Coating |
| Dynamic Response | Pull-in Time ≤ 30ms |
| Disassembly Tools | 33mm Hexagonal Socket |
| Material Composition | 20CrMnTi Low-carbon Alloy Steel |
|---|---|
| Technology | Thickness Of Galvanized Coating |
| Rubber Main Body | EPDM |
| Shift Response Time | ≤0.6 Seconds |
| Radial Load Capacity | ≥80kN |
| Motor Type | Permanent Magnet DC Motor |
|---|---|
| Material Composition | 20CrMnTi Low-carbon Alloy Steel |
| Size Specifications | Kingpin Adaptation Diameter φ52mm±0.02mm |
| Disassembly Tools | 33mm Hexagonal Socket |
| Communication Protocol | Supports The CANopen Protocol |
| Lifespan | >300 Million Times |
|---|---|
| Maintenance Requirements | Maintenance-free |
| Operating Temperature Range | -40°C To +80°C |
| Gas Supply Components | Air Compressor |
| Sensor Type | Height Sensor |
| Cost-Effective Solution | Provide Performance Equivalent To Or Even Better Than That Of The Original Factory At A Reasonable Price |
|---|---|
| Cold-Start Reliability | Ensure That The Heater Ignites Successfully In One Go Under Severe Cold Weather Conditions. |
| Consistent Fuel Flow | Ensure That The Heater Can Obtain A Stable Fuel Supply Under Various Operating Conditions |
| Precision Atomization | Core Function: Ensuring Complete Atomization Of Fuel To Achieve Efficient Combustion |
| High-Precision Manufacturing | Ensure That The Flow Rate And Injection Angle Of Each Fuel Injector Meet Strict Standards. |
| Battery Replacement Cycle | It Is Recommended To Replace Every 18 Months. |
|---|---|
| Anti-touch Design | Long Press For 3 Seconds To Confirm Unlocking |
| Seismic Fortification Intensity Level | 10 - 500Hz Sweep Frequency Vibration |
| Interface Type | 6PIN Waterproof Terminal |
| Certification Standards | Pass The CCC Certification |
| Low Battery Reminder | When The Voltage Is Less Than 2.6V, The Key Backlight Flashes. |
|---|---|
| Models Applicable To | Jinlong, Yutong, Zhongtong Buses |
| Antenna Type | Built-in FPC Flexible Antenna |
| Single Door Independent Control | Pneumatic Door Adaptation |
| General Interface | 5PIN Waterproof Terminal |
| Installation Method | Fixed To The Front Face Of The Vehicle Body With 4 High-strength Bolts |
|---|---|
| Sealing Process | Adopts A Double O-ring Sealing Design |
| Protection Level | IP67, Dustproof And Waterproof |
| Certification Standards | Obtain EU ECE R112 |
| Operating Temperature | -40℃~+85℃ |
| Temperature Tolerance | Operating Temperature - 40℃~+85℃ |
|---|---|
| Adjust The Speed | Total Adjustment Time < 3 Seconds |
| Operating Current | Adjustment State < 300mA |
| Power Consumption | Adjusting Motor < 7.2W |
| Humidity Protection | IP67 Protection Level |