| Installation Location | The Top Of The Air Shock Absorber Spring |
|---|---|
| Maintenance Convenience | The Structure Is Reasonably Designed |
| Connection Method | Standard Bolt Hole Positions |
| Material Composition | High-strength Steel |
| Durability | Strict Fatigue Test |
| Routine Maintenance | 60,000 - 80,000 Kilometers |
|---|---|
| High Reliability | Pass The 3C Certification |
| Model | Yuanfeng AD04-AD06 |
| Component Accuracy | Guide Sales, Piston |
| In Response To | Caliper Sticking |
| Core Functions | Brake Clearance Compensation |
|---|---|
| Advantages | Reduce Manual Maintenance |
| Compressed Air Consumption | Save Approximately 25% |
| Adopt | Riveting Process |
| Materials | High-strength Steel |
| Large Capacity Configuration | 15L And 20L Are Available For Customization. |
|---|---|
| Surface | Cathodic Electrophoretic Anti-corrosion |
| Adopt | Multi - Layer Welding Technology |
| Abnormal Air Pressure | Automatic Pressure Relief |
| The Compressive Strength Reaches | 5 Times The Rated Pressure |
| Pass Through | CNC 3D Scanning And Modeling |
|---|---|
| Adopt | Quick - Connect Metal Joint |
| Support | Arbitrary Bending Radius |
| Temperature Resistance Range | - 40℃ To 120℃ |
| Pressure Resistance Ability | ≤0.6MPa |
| System Linkage | Original Vehicle Pneumatic Door |
|---|---|
| Exhaust | Rotate The Handle By 90° |
| Surface | Electrophoretic Primer |
| Salt Spray Test | Over 1000 Hours |
| Meet; Satisfy | GB 13094-2017 |
| Apply To | - From The Frigid Zone Of - 40℃ To The High - Temperature Area Of 55℃ |
|---|---|
| Environmental Protection Design | The Materials Can Be 100% Recycled. |
| Lightweight | Aluminum Alloy Shell |
| Support | 1.2 - 1.5L Fuel Filling |
| Tensile Strength | ≥260MPa |
| Protection Level | IP65 Level Dustproof And Water Spray Proof |
|---|---|
| Typical Working Conditions | City Buses Start And Stop Frequently. |
| Load Capacity | Rated Thrust ≥ 1200N |
| Installation Method | Flange Installation |
| Lifespan | ≥20000 Hours |
| Temperature Adaptation | -40℃ Low-temperature Startup Without Jamming |
|---|---|
| Salt Spray Test | 96 Hours Without Red Rust |
| Dust Cover Fixing | 65Mn Spring Snap Ring |
| Extended Maintenance Cycle Without Lubrication | 100,000 Kilometers |
| Dimensional Accuracy | Ra≤0.8μm |
| Working Condition Adaptation | Designed Specifically For The Frequent Starts And Stops Of Urban Public Transport |
|---|---|
| High-temperature Durability | 130℃ Constant Temperature Durability Test For 400h With No Performance Drift |
| Wide Temperature Operation | Stable Operation Over The Entire Temperature Range From -40℃ To 125℃ |
| Response Speed | The Response Time To Sudden Changes In Rotational Speed Is ≤ 5ms |
| High Temperature Durability | 130℃ Constant Temperature Durability Test For 400h |