| Cold Adaptation | The Increase In Separation Force During Cold Start At -30℃ Is ≤ 15% |
|---|---|
| Environmental Adaptation | -40℃ To 120℃ Temperature Cycling 200 Times Without Cracks |
| Heart Structure | Flatness Of The Pressure Plate Working Surface ≤ 0.05mm/m |
| Thermal Stability | The Friction Coefficient Retention Rate At 350℃ Is ≥ 85% |
| Spring Layout | 36 Springs Are Symmetrically Distributed In 6 Groups |
| Environmental Adaptation | Operating Temperature -40℃ To +125℃ |
|---|---|
| Lightweight Design | Aluminum Alloy Shell Accounts For 70% |
| Efficiency Characteristics | Power Generation Efficiency ≥ 88% |
| Electromagnetic Compatibility | Radiated Disturbance ≤ 30dBμV/m |
| Starting Performance | -30℃ Cold Cranking Current ≤ 180A |
| Easy To Maintain | The Design Life Of The Brush Assembly Is ≥ 150,000 Kilometers |
|---|---|
| Protection Level | The Entire Machine Has IP54 Dust And Water Resistance Rating |
| Material Technology | The Shell Is Made Of ADC12 Aluminum Alloy By Die Casting. |
| Speed Characteristic | Idle Condition (800±50r/min) Output ≥ 60A |
| Efficiency Performance | Efficiency ≥ 85% At 75% Load |
| Temperature Adaptation | Operates In The Full Temperature Range From -40℃ To 125℃ |
|---|---|
| Environmental Testing | -40℃ To 125℃ High And Low Temperature Cycle Test |
| Material Composition | The Main Body Is Made Of A356 Aluminum Alloy |
| Load Capacity | Static Torque Bearing Capacity ≥ 850N・m |
| Vibration-resistant Design | Built-in Rubber Shock-absorbing Bracket |
| Intermittent Frequency Adjustable | The Intermittent Wiper Mode Supports Stepless Adjustment From 3 To 15 Times Per Minute. |
|---|---|
| Temperature Range Adaptation | Stable Operation Over The Entire Temperature Range From -40℃ To 85℃ |
| Service Life | The Overall Mechanical Service Life Is ≥ 100,000 Operating Cycles |
| Insulation Protection | The Insulation Resistance Of The Ontology Is ≥ 100MΩ |
| Vehicle Model Coverage | Designed Specifically For The Higer Series |
| Work In The Full Temperature Range | Stable Operation In An Environment Ranging From -40℃ To 85℃ |
|---|---|
| Pressure Drop Control | Initial Pressure Drop At Rated Air Volume ≤ 2kPa |
| Quality System | Produced By IATF 16949 Certified Factories |
| Precise Matching | Original Factory Number 1109-08269 |
| Dust Holding Capacity | Static Dust Holding Capacity ≥ 300g |
| High Temperature Stability | 250 ℃ High Temperature Compression Permanent Deformation Rate ≤ 1.5% |
|---|---|
| Temperature Range | -40 ℃ To 125 ℃ Full Temperature Range Operation |
| Carrying Capacity | Rated Transmission Torque 1200N ・ M |
| Identification And Traceability | Pressure Plate Hub Laser Etching Model |
| Main Material | HT250 Gray Cast Iron Material |
| Precise Adaptation | Original Factory Number 1601-00632 |
|---|---|
| Fatigue Life | After 100,000 Braking Cycles |
| Thermal Fatigue Test | After 1000 Cycles Of Testing At 100℃-120℃ |
| Medium Resistance | Resistant To DOT4 Brake Fluid Immersion For 168 Hours |
| Dynamic Response | 90% Of The Standard Pressure Is Established Within 0.3 Seconds |
| Quick-release Structure | The Filter Element Adopts A Clip-on Installation, And The Replacement Time Is ≤ 5 Minutes |
|---|---|
| Long-lasting And Durable | The Overall Simulated Service Life Of The Set Of Racks Is ≥ 30,000 Kilometers |
| Precise Adaptation | Designed Specifically For Yutong E12, CL6, And T7 New Energy Buses |
| Packaging Protection | Vacuum-sealed Packaging + Moisture-proof Buffer Box |
| Original Factory Traceability | Each Set Comes With A Unique QR Code |
| Material Technology | High-strength Cast Iron Main Body + Precision Steel Shaft Core |
|---|---|
| Original Factory Adaptation | Xiamen King Long Coach (Golden Dragon XML Series) |
| Mute Design | The Wheel Groove Adopts A Special Arc Design |
| Security Guarantee | Double Sealing Structure |
| Applicable Temperature Range | -40℃ To +120℃ |