| Corrosion Resistant | Salt Spray Test For 480 Hours |
|---|---|
| Total Length | 350mm~600mm |
| Thermal Insulation Coefficient Of Plastic Materials | ≤0.15W/(m・K |
| Temperature Resistance Range | -40℃~150℃ |
| Vibration Resistance Performance | 10-2000Hz |
| Number Of Durable Uses | The Horn Button Showed No Failure After 500,000 Press Tests. |
|---|---|
| Weather Resistance Performance | Works In The Full Temperature Range From -40℃ To 80℃ |
| Acoustic Characteristics | The Sound Transmission Efficiency Of The Horn Is ≥ 95% |
| Protection Level | Overall, It Meets The IP6K5K Protection Standard |
| Shock Resistance | Can Withstand An Impact Energy Of 10J |
| The Light Intensity Meets The Standard. | The Luminous Intensity Of The Reference Axis Is ≥ 2cd |
|---|---|
| Luminous Efficiency | Photoelectric Conversion Efficiency ≥ 85lm/W |
| Light Source Type | Using 5730 Packaged Red LED Lamp Beads |
| Response Speed | LED Lighting Response Time ≤ 10ms |
| Light-transmitting Cover Design | High Light Transmittance PC Mask |
| Temperature Compensation | Operating In The Full Temperature Range Of -40℃ To 125℃ |
|---|---|
| Vibration Resistance Performance | Pass The 5-2000Hz Random Vibration Test |
| Shell Material | 316L Stainless Steel Integrated Forging |
| Threaded Interface | M16×1.5 Standard Taper Pipe Thread |
| Salt Spray Protection | Neutral Salt Spray Test For 96 Hours |
| Dustproof And Waterproof | Prevent Dust, Oil Stains, And Liquids From Seeping Into The Gear Shift Mechanism |
|---|---|
| Full Product Name | Gearshift Dust Cover Three Flexible Shaft Assembly |
| Maintenance Convenience | The Dust Cover Can Be Replaced Separately. |
| Protection Level | IP54 Dustproof And Splash-proof |
| Service Life | ≥5 Years Or 1,000,000 Kilometers |
| Noise Reduction Design | Using A Silent Motor + Shock-absorbing Bracket |
|---|---|
| Locked-rotor Current | ≤25A, Built-in Thermal Protection Device |
| Motor | Permanent Magnet DC Reversible Motor |
| Climb And Descent Rate | 80-120mm/s, Stable And Fast |
| No-load Power | ≤30W, Low-power Design |
| Core Structure | Pneumatic Control Valve + Hydraulic Master Cylinder + Power Piston + Return Spring |
|---|---|
| Rated Thrust | Maximum Output Thrust ≥ 4500N |
| Execution Standard | Compliant With QC/T362-2011 |
| Work Pressure | Air Pressure 0.6-0.8MPa |
| Sealing Grade | IP54 Protection Standard |
| Genuine OE Part Number | 4891252, Authentic -engineered Water Pump, Traceable Via Official Verification System |
|---|---|
| High-Performance Cooling | Max Flow Rate 120L/min, Optimized Impeller Design Enhances Heat Dissipation Efficiency By 30% |
| Anti-Cavitation Technology | Special Impeller Blade Design Prevents Air Bubble Formation, Ensuring Stable Water Flow |
| Maintenance-Free | Sealed Bearing & Pre-filled Lubricant, No Periodic Maintenance Needed Under Normal Use |
| Operating Pressure | Rated Working Pressure 150kPa, Peak Pressure Up To 200kPa, Stable Under Extreme Loads |
| Connector Specifications | Standard 36-pin Waterproof Connector For Vehicle Use |
|---|---|
| Lighting System Compatibility | Supports Jinlong Original LED / Halogen Headlamps |
| Communication Protocol | Compatible With J1939/CANopen Dual Protocols |
| Intelligent Management And Control | Integrated Automatic Light Control |
| Output Channel | 16 Independent Control Outputs |
| General Compatibility Range | It Is Compatible With Domestic Mainstream Brand Buses Of The Same Specification, Such As Zhongtong, Foton AUV, And King Long, At The Same Time. |
|---|---|
| Sealing Process | End Face Press-fit + Steel Wire Lock Ring Double Sealing Structure |
| Protection Level | IP66 Dustproof, Waterproof And Oilproof |
| Implementation Standard | Compliant With ISO 14409 |
| Brand Ownership | Vibracoustic |