| Operating Temperature Range | Stable Operation In A Wide Temperature Range Of -40℃ To +125℃ |
|---|---|
| Accessory Type | Piezoresistive Air Pressure Sensor For Commercial Vehicles |
| Operating Voltage Specification | DC 24V, Exclusively For Commercial Vehicles |
| Measurement Accuracy Class | High-precision Measurement Of ±0.5% FS |
| General Adaptation Attributes | Standardized Universal Design |
| Core Dimension Specifications | Standard Nominal Diameter Φ395mm |
|---|---|
| Brand Ownership | Suitable For EATON Fuller |
| Parameters Of The Damping System | Three-stage Graded Torsional Damping Structure |
| Operating Temperature Range | Stable Operation In A Wide Temperature Range Of -40℃ To +180℃ |
| Core Material Composition | High Wear-resistant Non-asbestos Environmentally Friendly Friction Material |
| Quality Commitment | Inspection One By One, With A Pass Rate Of 100% (supporting Attached Inspection Reports) |
|---|---|
| Packaging | Carton, Wooden Box, Custom Packaging |
| Model | AVi168SP3003.3701-02195 |
| International Certification | CE/IATF 16949+ISO 14001 |
| Low Noise Design | No-load Noise≤65dB |
| Quality Commitment | Inspection One By One, With A Pass Rate Of 100% |
|---|---|
| Packaging | Carton, Wooden Box, Custom Packaging |
| Lightweight Design | The Weight Of A Single Clip Is ≤15g. |
| Vibration Fatigue Life | 50Hz Sinusoidal Vibration Test |
| Model | U-shaped Cable Fixing Card |
| Purpose | Air Suspension System |
|---|---|
| Characteristics | Automatic Adjustment |
| Applicable | Golden Dragon Bus |
| Install | Replace Directly |
| Structure | Pneumatic Type |
| Application | Bus Centralized Lubrication |
|---|---|
| Function | Lubricant Injection |
| Coupler Type | Standard Nozzle |
| Pressure Rating | High Pressure |
| Type | Grease Gun |
| Material Composition | Aluminum Alloy Die-cast Valve Body + Stainless Steel Valve Core + Nitrile Rubber Seal |
|---|---|
| Accessory Type | 3/2 General Formula Solenoid Directional Valve |
| Interface Specification | M12×1.5 Standard Threaded Interface |
| Installation Specifications | Fixed With Double-hole Bolts |
| Original Factory Code | 4721706060 |
| Temperature Adaptation | Works In The Full Temperature Range From -40℃ To 120℃ |
|---|---|
| Material Composition | The Rod Body Is Forged From 40Cr Alloy Structural Steel. |
| Size Specifications | Center 137mm±0.5mm, Rod Diameter 20mm |
| Vibration Test | Pass The 10-2000Hz Random Vibration Test |
| Fatigue Life | After 200,000 Cycles Of Load Testing |
| Adapt The Friction Plate | Compatible With 395mm Specification, 10±0.5mm Thickness Clutch Friction Plates |
|---|---|
| Mounting Hole Positions | 8-hole Uniformly Distributed Standard Mounting Flange |
| Core Size | Nominal Diameter Of Standard Pressure Plate 395mm |
| Core Structure | Mainstream Structure Of Push-type Diaphragm Spring |
| Rated Transmission Torque | Maximum Transmission Torque ≥ 1800N・m |
| Operating Temperature | -40℃ To + 125℃ Wide Temperature Range Design |
|---|---|
| Operating Voltage | Support 12V/24V |
| Stably Output The Voltage To | 13.5-14.8V |
| Pass The Salt Spray Test | 1000 Hours |
| Model | 605-1C |