| Composition | Adopt The Formula Of High Vinyl Rubber + Aramid Fiber + Wollastonite. |
|---|---|
| Performance Advantages | Friction Coefficient Stability Is Increased By 20%. |
| Noise Reduction Effect | Combined With Double-layer Silencing Sheet |
| Compliance | Passed The EU Certification Of ECE R90. |
| Maintenance Efficiency | 3 Minutes Tool-free Replacement |
| Safety Features | Sawtooth Back Plate + High-strength Resin Bonding |
|---|---|
| Weight Loss Advantage | Adopt 6061-T6 Aviation Aluminum Back Plate. |
| Performance Advantages | Stable Value Of Friction Coefficient: 0.43 ± 0.02 |
| Long-term Design | Edge Chamfering + Arc Friction Surface |
| Production Standard | Batch Defect Rate ≤ 0.01%. |
| Convenient Maintenance | Fifteen-degree Diversion Chamfer At The Edge Of The Friction Block. |
|---|---|
| Performance Advantages | Stable Value Of Friction Coefficient: 0.45±0.03 |
| Weight Loss Advantage | Adopt ADC12 Aluminum Alloy Backplane. |
| Materials | High Temperature Ceramic Formula |
| Product Model | VIE-19.5W-3501190,WVA29126 |
| Cycle Life | 500,000 Times Without Jamming |
|---|---|
| Certification Standards | IATF 16949/GB 16735 |
| Installation Method | Fixed By Four Bolts |
| Working Medium | DOT4 Brake Fluid |
| Piston Stroke | 30mm±0.5mm |
| Surface Treatment | Matte Blackening Treatment For The Wheel Hub |
|---|---|
| Wheel Hub Material | High-strength Nylon 66 + 30% Glass Fiber |
| Tensioner Type | Automatically Tensioned Type |
| Bearing Type | Double Row Ball Bearing |
| Proof Standard | IATF 16949/GB/T 19055 |
| Hydrogen Embrittlement Protection | After Pickling, Conduct Dehydrogenation Treatment At A Constant Temperature Of 200°C For 4 Hours. |
|---|---|
| Filtration Efficiency | Filtration Efficiency Of 3μm Particles Is 98.6% |
| Connection Method | Spin-on Quick-release Structure |
| Maintenance Interval | 80,000 Kilometers Or 48 Months |
| Working Principle | Multi-level Filtering System |
| Hydrogen Embrittlement Protection | After Plating, Conduct A Dehydrogenation Treatment At A Constant Temperature Of 200℃ For 4 Hours. |
|---|---|
| Basic Parameters | Basic Parameters - Ball Head Diameter Φ23.5mm × Threaded Rod Diameter 30mm |
| Wear-resistant Design | Spherical Surface Hard Chromium Plating |
| Fatigue Life | 1 Million Times Of Swing Angle Cycles |
| Structural Design | Double Ball Seat All-metal Joint |
| Compatible Vehicle Models | Yutong Models Such As ZK6120H/6118Y2/6805DX |
|---|---|
| Storage Conditions | Dry And Light - Avoiding Environment |
| Fatigue Life | 1 Million Times Of Swing Angle Cycles |
| Structural Design | Double-ball Seat All-metal Joint |
| Disassembly Tools | 27mm Plum Blossom Wrench |
| Pressure Characteristics | Turn On The Pressure Deviation ≤ ±0.3 Bar |
|---|---|
| Certification Standards | QC/T 29105+ IATF 16949:2016 |
| Sealing System | Double - Lip Sealing Structure |
| Structural Design | Spring-loaded Plunger Valve |
| Lubrication System | Lithium-based Grease Filling |
| Length | L=250mm,L=275mm |
|---|---|
| Shaft Diameter | Φ35mm,Φ40mm |
| Damping Coefficient | 10~12N・s/mm |
| Base Material | 40Cr Alloy Steel |
| Critical Speed | ≥8000r/min |