| Typical Dimensions | Outer Diameter Φ88mm × Inner Diameter Φ50mm × Height 67mm |
|---|---|
| Full-wrapped Structure | The Two Ends Of The Metal Shell Are Bent Inwards By 3mm. |
| Mainstream Adaptation | DongfengDena 435/460/485 Single-stage Reducing Axle |
| Metal Framework | Q345B Low Alloy High Strength Steel |
| Wear-resistant Layer | Polyoxymethylene (POM) Ball Bowl |
| Fatigue Life | ≥200ten Thousand Times |
|---|---|
| Salt Spray Test | No Corrosion Within 480h |
| Material | Specialty Rubber |
| Dynamic Stiffness | 300~500N/mm |
| Hardness | 70±5 Shore A |
| High-resolution Detection | The Minimum Identifiable Oil Level Change Is 3mm |
|---|---|
| Compatible With Multiple Vehicle Models | Suitable For Higer KLQ6129, KLQ6896, Etc. |
| Pressure Resistance And Impact Resistance | Pressure Bearing Range - 0.1MPa~32MPa |
| Low Fuel Warning | The Trigger Threshold Is Configurable |
| Fast Response Characteristics | Signal Update Frequency ≤ 100ms |
| Low Friction Design | Copper-based Self-lubricating Bushings Are Used, And The Friction Coefficient Is ≤ 0.08. |
|---|---|
| Security Authentication | The Support Assembly Passes The 1.5 Times Static Load Test |
| High-precision Cooperation | Tolerance Of Rocker Arm Shaft Hole ±0.01mm |
| Wide Temperature Adaptability | Operating Temperature Range - 40℃~120℃ |
| Install | Dedicated Car Customization Interface |
| Low - Temperature Starting Performance | The Response Time Is ≤80ms In An Environment Of - 30℃ |
|---|---|
| Flow Characteristics | Fast Charging / Slow Charging Dual Mode |
| Service Life | ≥ 1 Million Opening And Closing Cycles |
| Misoperation Protection | Overload Protection |
| Valve Core Material | Stainless Steel 304 |
| Optional Upgrade Package | Containing Throttle Valve And Solenoid Valve |
|---|---|
| Certification Standards | Pass CCC Certification And ISO 16949 |
| Compatible Gate Pump | MB50-180, MB-N, MB-100, Etc. |
| Lifespan | ≥100,000 Loop Cycles |
| Applicable Vehicle Models | 10 - 18 Meter Buses |
| Service Life | ≥800,000 Opening And Closing Cycles |
|---|---|
| Configuration | Front Door Opens. Rear Door Opens. |
| Anti-pinch Protection Function | Air Pressure Feedback Sensor |
| Drive Form | Single-cylinder Linkage Type |
| Speed Regulation Function | Two-way Throttle Valve |
| Installation Dimensions | Inner Diameter × Outer Diameter × Thickness = 120×160×30mm |
|---|---|
| Compatible Vehicle Models | Youth, Jinlong, European And American Buses |
| Work Pressure Range | Static 0.05MPa, Dynamic 0.03MPa |
| Service Life | ≥5 Years / 500,000 Kilometers |
| Bench Test | Axial Impact Force 3000N |
| Airbag Material | Multi - Layer Cord Fabric + Natural Rubber / Neoprene Rubber |
|---|---|
| Compatible Vehicle Models | Urban Buses, Tourist Coaches, High - End Business Buses |
| Compatible Models | It Needs To Specifically Correspond To The Vehicle Model. |
| Installation Location | Front Axle/Rear Axle/Full Vehicle Suspension |
| Shock Absorption Effect | Damping Adjustable |
| Maintain Features | Maintenance - Free Design |
|---|---|
| Vehicle Model Adaptation | Cover Large Buses |
| Fatigue Life | GB/T 13061-2017 |
| Carrying Capacity | 1.5 KN - 6.5 KN |
| Material | Rubber Air Bag |