| Temperature Adaptation | Operates In The Full Temperature Range From -40℃ To 125℃ |
|---|---|
| Environmental Testing | -40℃ To 125℃ High And Low Temperature Cycle Test |
| Material Composition | The Main Body Is Made Of A356 Aluminum Alloy |
| Load Capacity | Static Torque Bearing Capacity ≥ 850N・m |
| Vibration-resistant Design | Built-in Rubber Shock-absorbing Bracket |
| Number Of Durable Uses | The Horn Button Showed No Failure After 500,000 Press Tests. |
|---|---|
| Weather Resistance Performance | Works In The Full Temperature Range From -40℃ To 80℃ |
| Acoustic Characteristics | The Sound Transmission Efficiency Of The Horn Is ≥ 95% |
| Protection Level | Overall, It Meets The IP6K5K Protection Standard |
| Shock Resistance | Can Withstand An Impact Energy Of 10J |
| Intermittent Frequency Adjustable | The Intermittent Wiper Mode Supports Stepless Adjustment From 3 To 15 Times Per Minute. |
|---|---|
| Temperature Range Adaptation | Stable Operation Over The Entire Temperature Range From -40℃ To 85℃ |
| Service Life | The Overall Mechanical Service Life Is ≥ 100,000 Operating Cycles |
| Insulation Protection | The Insulation Resistance Of The Ontology Is ≥ 100MΩ |
| Vehicle Model Coverage | Designed Specifically For The Higer Series |
| The Light Intensity Meets The Standard. | The Luminous Intensity Of The Reference Axis Is ≥ 2cd |
|---|---|
| Luminous Efficiency | Photoelectric Conversion Efficiency ≥ 85lm/W |
| Light Source Type | Using 5730 Packaged Red LED Lamp Beads |
| Response Speed | LED Lighting Response Time ≤ 10ms |
| Light-transmitting Cover Design | High Light Transmittance PC Mask |
| Work In The Full Temperature Range | Stable Operation In An Environment Ranging From -40℃ To 85℃ |
|---|---|
| Pressure Drop Control | Initial Pressure Drop At Rated Air Volume ≤ 2kPa |
| Quality System | Produced By IATF 16949 Certified Factories |
| Precise Matching | Original Factory Number 1109-08269 |
| Dust Holding Capacity | Static Dust Holding Capacity ≥ 300g |
| High Temperature Stability | 250 ℃ High Temperature Compression Permanent Deformation Rate ≤ 1.5% |
|---|---|
| Temperature Range | -40 ℃ To 125 ℃ Full Temperature Range Operation |
| Carrying Capacity | Rated Transmission Torque 1200N ・ M |
| Identification And Traceability | Pressure Plate Hub Laser Etching Model |
| Main Material | HT250 Gray Cast Iron Material |
| Speed Range | 45r/min (low Speed) / 65r/min (high Speed) |
|---|---|
| Motor Material | Aluminum Alloy Housing + Nylon Gears |
| Adapt To The Windshield Wiper Arm | Single-arm / Double-arm Type |
| Certification Standards | IATF 16949/GB/T 24348 |
| Environmental Temperature Range | -40℃~+85℃ |
| Calipers Material | Aluminum Alloy ADC6 |
|---|---|
| Installation Method | Bolt-fixed Type |
| Vibration Resistance Performance | 50Hz~2000Hz |
| Seal Material | Nitrile Rubber |
| Caliper Types | Floating Type |
| Stability | Maintain The Stability Of The Vehicle Body Posture |
|---|---|
| Durability | After 1 Million Cycles Of Fatigue Testing |
| Carrying Capacity | Load - Bearing Capacity Of Over 5 Tons |
| Vehicle Model Adaptation | Youth Neoplan JNP6126, Etc. |
| Stiffness Characteristics | Variable Stiffness Design |
| Applicable Vehicle Model | Models Such As Jinlong And Yutong |
|---|---|
| Airbag Material | Natural Rubber + Nylon Fiber |
| Mounting Position | Front Axle/Rear Axle |
| Operating Temperature Range | -40℃ To +70℃ |
| OEM | 556-03-8015 |