| Millisecond-level Adaptive Response | Support Dynamic Adjustment Under Complex Working Conditions Such As Cold Start Of The Engine And Rapid Acceleration. |
|---|---|
| Overspeed Protection | When The Rotational Speed Is Greater Than 6000 Rpm, Locking Is Triggered To Prevent The Tensioner Pulley From Flying Off. |
| Timing Synchronization Guarantee | Accumulated Error Is Less Than ±0.5° Crankshaft Angle To Avoid The Risk Of Knocking Caused By Valve Timing Deviation. |
| Material And Craftsmanship | Adopt QT700-2 Nodular Cast Iron. The Tensile Strength Is ≥700 MPa. The Fatigue Life Is Over 1 Million Times. |
| High-temperature Fatigue-resistant Coating | The Surface Is Sprayed With Molybdenum Disulfide (MoS₂) Dry Film, And The Friction Coefficient Is ≤0.05. |
| High-strength And Wear-resistant | Adapt To The Frequent Shifting Needs Of Heavy Vehicles. |
|---|---|
| Anti-fatigue Design | Cycle Life Exceeds 500,000 Times Without Deformation. |
| Shock Absorption | Rubber Damping Block Reduces Shift Shock. |
| Quick Response | Complete Gear Shifting Within 0.2 Seconds. |
| Low Temperature Startup Optimization | Work Normally In An Environment Of -40℃. |
| Packaging | Carton, Wooden Box, Custom Packaging |
|---|---|
| Thermal Fading | High Temperature Inhibition |
| Materials | Ceramic Composite Formula |
| Structure | High Compressive Strength |
| Maintenance | Low Dust And Easy To Clean. |
| Quality Commitment | Inspection One By One, With A Pass Rate Of 100% |
|---|---|
| Packaging | Carton, Wooden Box, Custom Packaging |
| Noise Reduction Design | Non-metallic Elastic Bushing |
| Overload Protection | Shear Pin Safety Structure |
| Accessory Type | Bus Transmission Shaft |
| Temperature Resistance Performance | Operating In A Wide Temperature Range From -40℃ To 125℃ |
|---|---|
| Speed Range | Operating Speed 600-6000r/min |
| Intelligent Adjustment | Built-in MCU Digital Regulator |
| Shell | Aluminum Alloy Die Casting |
| Electrical Performance | Rated Voltage 28V DC |
| Quality Commitment | Inspection One By One, With A Pass Rate Of 100% |
|---|---|
| Packaging | Carton, Wooden Box, Custom Packaging |
| Fatigue Life | Simulate 200,000 Start-stop Cycle Tests. |
| Accessory Type | Generator Maintenance Parts |
| High Purity Electrographite Brush | Carbon Content ≥ 99.5% |
| Rated Performance | Maximum Transmission Torque Is 1280N・m, And Static Friction Torque Is ≥1800N・m |
|---|---|
| Adaptation Specifications | Designed Specifically For Eaton Automatic Transmissions |
| Composition Of Core Materials | The Driven Disc Steel Plate Is Made Of 65Mn Spring Steel |
| Friction Characteristics | Room Temperature Friction Coefficient 0.38±0.02 |
| Spline Hub Process | 20CrMnTi Carburizing And Quenching Treatment |
| Temperature Range Adaptation | Operates In The Full Temperature Range From -40℃ To 85℃ |
|---|---|
| Service Life | The Buckle Opening And Closing Cycle Is ≥ 50,000 Times |
| Static Strength | The Static Breaking Force Of The Webbing Is ≥ 22kN |
| Webbing Material | Woven From High-strength Polyester Fibers |
| Locking Parameters | Emergency Locking Acceleration ≥ 2.5g |
| Power | Low Energy Consumption |
|---|---|
| Heating | Rapid Temperature Rise |
| Shell | Corrosion Resistance |
| Maintenance | Maintenance-free |
| Movement | All Copper Material |
| Conform To; Comply With; Accord With | ISO 9001 Certification |
|---|---|
| High Precision | CNC Machining |
| Temperature Resistance | - 40°C-120°C |
| Salt Spray Test | >1000 Hours |
| Model | 1608-00148 |