Special Vehicle Models | Support Customizing The Diameter Of The Ball Head And The Length Of The Rod Part |
---|---|
Special Coating | Molybdenum Disulfide Dry Film Lubricating Coating |
Spherical Gap | Axial Right - Angled Direction 0.025~0.065mm |
Applicable Oils And Fats | Lithium-based Molybdenum Disulfide Grease |
Thread | Right-hand Thread (R), Left-hand Thread (L) |
Installation Hole Size | Installation Hole Diameter 48, Taper 23.5 |
---|---|
Accessory Type | Suspension Connecting Ball Joint |
Corrosion Resistance | Salt Spray Test ≥ 500 Hours |
Material Type | High-strength Alloy Steel |
Connection Method | Threaded Connection |
Accessory Type | Seat Retaining Buckle - Modified Seat Bolt |
---|---|
Installation Method | Tool-free Quick Installation Design |
Applicable Scenario | Cars, Buses, Trucks, Modifications |
Anti-misoperation | Guide Positioning Groove Design |
Applicable Models | A Full Range Of Car Seat Platforms |
Adapt | Youth, Yutong, King Long |
---|---|
Fatigue Test | More Than 80,000 Times |
Material | Aluminum Alloy |
Structure | Six-bar Linkage |
The Lifespan Can Reach | 10 - 12 Years |
Maintenance Cycle | It Is Recommended Every 20,000 Kilometers |
---|---|
Surface Treatment | Carburized Layer Depth |
Heat Treatment Process | Quenching Hardness |
Lubrication Method | Grease Lubrication |
Journal Size | Heteromorphism |
Pressure Difference Index | The Maximum Pressure Difference ≤ 40Kpa |
---|---|
Durability | After More Than 100,000 Cycles Of Testing |
Exhaust Rate | High Exhaust Rate Of Quick Release Valve |
Valve Body Material | High-strength Aluminum Alloy |
Connection Method | Threaded Connection |
Models Applicable To | Buses Such As King Long, Higer, Yutong, Etc. |
---|---|
Adapt | Three-speed Electromagnetic Clutch |
Performance | Durable And Long-lasting |
Material Properties | Bearing Steel Material |
Structure | Double-column Angle |
Service Life | More Than 50,000 Open - Close Cycles |
---|---|
Material | High-strength Alloy |
Structure | Four-bar Linkage |
Connection Point | Reinforced Type |
Temperature | - 40℃ - 80℃ |
Alarm Methods | Acoustic And Optical Alarm |
---|---|
Installation Method | Threaded Connection |
Operating Temperature | -45℃ - +90℃ |
Barometric Pressure Measurement Range | 0 - 1.2MPa |
Service Life | ≥8 Years |
Type | Non-contact Hall Sensor |
---|---|
Temperature Range | - 40℃ - +125℃ |
Response Frequency | Up To 1KHz |
Operating Voltage | 6.5V - 12V |
Vehicle Speed Measurement | Error ±1% |