| Packaging | Carton, Wooden Box, Custom Packaging |
|---|---|
| Applicable Scenario | Air Pressure Detection Of Air Reservoir |
| Product Model | QG2221E1-L654M3 |
| Accessory Type | Air Pressure Sensor |
| Shell Material | Stainless Steel |
| Control | Intermittent Speed Regulation Mode |
|---|---|
| Install | Original Car Hole Direct Installation |
| Material | All Aluminum Die-casting Shell |
| Bearing | Stainless Steel Sealed Shaft |
| Compatible | Multi-segment Wiper Arm |
| Plug And Play | NPT 1/4 Thread Interface. Installation Can Be Completed In 3 Minutes. |
|---|---|
| CAN Bus Output | Support J1939 Protocol And Be Deeply Adapted To Yuchai ECU. |
| Measuring Range | 0-10 Bar Covers The Normal Working Range Of Oil Pressure. |
| Precision | ±1% FS Ensures Accurate And Reliable Oil Pressure Data. |
| Automatic Temperature Drift Compensation | Ensure Stable Measurement At Different Temperatures. |
| Lubrication Design | Automatic Lubricating Mechanism |
|---|---|
| Maintenance Cost | The Pump Sleeve Can Be Replaced. |
| Technical Certification | WABCO Global Standards |
| Product Model | 1604-00868 9700516080 |
| Sealing Technology | New Type Exhaust Valve |
| Input Torque | 10N・m (commercial Vehicle) |
|---|---|
| Noise Control | Meshing Noise ≤ 65 DB |
| Metal Category | 40Cr Quenched Steel |
| Installation Method | Spline Connection |
| Accessory Type | Gear Converter |
| Special Customization | Support Diameter Specifications From Φ75 To Φ105mm And Length Specifications From 110 To 150mm |
|---|---|
| Dynamic Fatigue | 100kN Alternating Load Cycles 100,000 Times |
| Rubber Body | Ethylene Propylene Diene Monomer Rubber |
| Hollow Pin Shaft | Seamless Steel Pipe Hot Forging Forming |
| Rotation Angle | ±15° Without Jamming |
| Environmental Adaptability | Salt Spray / Sand Dust / High Temperature Working Conditions |
|---|---|
| Security Features | Overload Protection Breaking Strength ≥ 30MPa |
| Service Life | 5 - 7 Year Anti - Aging Cycle |
| Tear Resistance Strength | Tensile Strength ≥ 20MPa |
| Material Of Metal Parts | 20# Seamless Steel Pipe |
| Quality Commitment | Inspection One By One, With A Pass Rate Of 100% |
|---|---|
| Packaging | Carton, Wooden Box, Custom Packaging |
| Surface Treatment | Electrophoretic Baking Finish Process |
| Applicable Scenario | Bus Luggage Compartment Door Lock |
| Model | Luggage Compartment Door Lock |
| Smooth Treatment Of Inner Wall | Roughness Ra ≤ 1.6 μm, Pressure Drop Reduced By 20%. |
|---|---|
| Packaging | Carton, Wooden Box, Custom Packaging |
| Pulse Test | 100,000 Pressure Cycles |
| Metal Joint | Thicken The Pipe Wall |
| Accessory Type | Warm Air Accessories |
| High-strength Aluminum Alloy Cylinder Block | Dual Advantages Of Lightweight And Corrosion Resistance |
|---|---|
| Quick Installation | 2 Bolts Fixed. Replacement Completed Within 15 Minutes. |
| Silent Operation | Air Pressure Adjustment Noise Is Less Than 45 Decibels. |
| Accessory Type | Pneumatic Support Rod For Cabin Door/seat |
| Packaging | Carton, Wooden Box, Custom Packaging |