Shell | ADC6 Aluminum Alloy |
---|---|
Built-in | Heating Module |
Lifespan | Long-life Design |
Wide Temperature Operating Range | -40℃~+85℃ |
Heat | Intelligent Temperature Control |
Physical Properties | High Hardness |
---|---|
Material | Alloy Cast Iron |
Temperature Resistance Range | -40℃~+150℃ |
Dynamic Sealing Pressure | 0.2-0.5MPa |
Salt Spray Test | 1000 Hours |
Material Grade | 40Cr Alloy Structural Steel |
---|---|
Compatible Wheels | Yutong ZK6799 Series |
Service Life | ≥80,000 Kilometers |
Surface Treatment | Dacromet Coating |
Packaging Quantity | 20 Pieces / Box |
Support | Yutong ZK6122 And All Series Of Commercial Vehicles |
---|---|
Standard Configuration | Φ8mm Quick-connect Fitting |
Anti-vibration Design | Pass Through 10 - 500Hz |
Adopt | Aluminum Alloy Material |
Wide Temperature Range Operation | -40℃ To 85℃ |
Model | HZ723 HY723 3502-00609 3502-00608 |
---|---|
Shell Material | High-strength Aluminum Alloy |
Vibration Resistant | 10~500Hz, Acceleration 20g |
Lubrication System | Lithium-based Grease |
Worm Gear And Worm Materials | 42CrMo Alloy Steel |
Compatible Vehicle Models | Haige KLQ120G03D/KLQ6110K05D/6850 Series And Other Vehicle Models |
---|---|
Fatigue Life | 2.5 Million Cycles Of Angular Displacement |
Lubrication System | Compound Lithium-based Grease Filling |
Structural Design | Double Ball Seat All-metal Joint |
Surface Treatment | Zinc-nickel Alloy Electroplating |
Limit Rotational Speed | Compatible With ConMet 5.5/6.5 Series Wheel Ends |
---|---|
Specification | Match 505/510/525, Etc. |
Material | Memory Alloy Spring |
Maintenance - Free Cycle | 1 Million Kilometers |
Technical Standards | SAE J1264 |
Compatible Design | Built-in Spring Check Valve |
---|---|
Sealing Material | High-performance Rubber |
Filter Paper | High-quality Filter Paper |
Convenience | Replace Is Simple |
Adapt | Yuchai Engine |
Function | Air Pressure Assist Form |
---|---|
Main Components | Control Valve |
Model | 1607300S7BB |
Temperature Range | - 40℃~80℃ |
Cylinder Diameter | 70mm |
Installation Location | Located In The Engine And Transmission |
---|---|
Interface | General Standards For Easy Installation. |
Surface Treatment | Quenching, Hard Chromium Plating |
Maintenance Cost | The Pump Sleeve Can Be Replaced. |
Control | Internal And External Dual Modes |