| Shell Material | Uses UL94 V-0 Flame-retardant ABS Engineering Plastic |
|---|---|
| Cost Advantage | 30% Lower Than The Price Of Imported Original Parts |
| Insulating Property | Insulation Resistance Between Terminals ≥ 100MΩ |
| Integrated Function | Integrated Lighting Control |
| Protection Level | Overall Protection IP65 |
| Seal Material | Ethylene Propylene Diene Monomer Rubber |
|---|---|
| Service Life | ≥100,000 Opening And Closing Cycles |
| Surface Treatment | Powder Coating Process |
| Lock Body Type | Link - Type Side Lock |
| Main Body Material | Aluminum Alloy |
| Service Life | ≥ 500,000 Times Of Opening And Closing Cycles |
|---|---|
| Bistable Design | Maintain When Powered On |
| Valve Core Material | Stainless Steel 304 |
| Installation Method | Scaffold Fixation |
| Valve Body Material | Aluminum Alloy |
| Anti - Error Installation Identification | The End Face Of The Framework Is Engraved With Installation Direction Arrows. |
|---|---|
| Lightweight Design | The Framework Adopts A Hollow Stamping Process |
| Double - Lip Seal | Main Lip To Prevent Oil Leakage |
| Maintenance - Free Design | Long - Life Rubber Formula |
| Weather Resistance And Anti-aging | Anti-UV Coated Rubber |
| Function | Precisely Detect The Vehicle Speed |
|---|---|
| Installation Location | Beside The Gearbox |
| Precision | Relatively High |
| Type | Hall Type |
| Voltage | 6.5 - 16V |
| Shell | ADC6 Aluminum Alloy |
|---|---|
| Built-in | Heating Module |
| Lifespan | Long-life Design |
| Wide Temperature Operating Range | -40℃~+85℃ |
| Heat | Intelligent Temperature Control |
| Physical Properties | High Hardness |
|---|---|
| Material | Alloy Cast Iron |
| Temperature Resistance Range | -40℃~+150℃ |
| Dynamic Sealing Pressure | 0.2-0.5MPa |
| Salt Spray Test | 1000 Hours |
| Material Grade | 40Cr Alloy Structural Steel |
|---|---|
| Compatible Wheels | Yutong ZK6799 Series |
| Service Life | ≥80,000 Kilometers |
| Surface Treatment | Dacromet Coating |
| Packaging Quantity | 20 Pieces / Box |
| Sealed System | The Piston Adopts Imported Polyurethane (PU) Double-lip Seal + Dust-proof Combination |
|---|---|
| System Compatibility | Suitable For Hydraulic Control And Pneumatic Power Assist Systems |
| Cylinder Block Material | Adopts ADC12 Die-cast Aluminum Alloy For Integral Molding |
| Core Structure | Dual-chamber Hydraulic Control Pneumatic Booster |
| Convenient Exhaust | Equipped With An Independent Exhaust Valve |
| Installation Location | Suitable For Side-mounted Luggage Compartment Doors, Rear-mounted Luggage Compartment Doors And Engine Compartment Doors |
|---|---|
| Humidity Adaptation | No Rust In An Environment With Humidity ≤ 95% RH |
| Impact Resistance Strength | Lock Body Compressive Strength ≥ 800MPa |
| Lock Cylinder Configuration | Using A Copper Pin Tumbler Lock Cylinder |
| Temperature Tolerance | Operating Temperature -40℃~+85℃ |