| Material Composition | Chloroprene Rubber + Cord Reinforcement Layer |
|---|---|
| Shock Absorption Characteristics | Air Damping Shock Absorption |
| Load Range | Adapt To 12-meter Buses |
| Sealing Performance | Multi - Layer Sealed Lips |
| Application Scenarios | Bus Shock Absorption |
| Temperature Adaptation | Works In The Full Temperature Range From -50℃ To 150℃ |
|---|---|
| Material Properties | Adopt 42CrMo High-strength Alloy Structural Steel |
| Vibration Resistance | Passed The 5-2000Hz Random Vibration Test |
| Lightweight Process | Adopt The Cold Heading Forming Process |
| Corrosion-resistant Treatment | The Surface Is Coated With Dacromet. |
| Temperature Range | Works Normally In The Full Temperature Range From -40℃ To 120℃ |
|---|---|
| Precision Machining | Cylindricity Of The Cross Shaft Journal ≤ 0.005mm |
| Angular Compensation | Maximum Swing Angle Of Single Cross Shaft ±25° |
| Vibration Resistance Performance | Can Withstand Random Vibration Of 5-2000Hz |
| Fatigue Life | No Failure After 4 Million Torsion Cycle Tests |
| Reset Temperature | Reset Temperature Difference: 15℃, Automatic Reset At 70±5℃ |
|---|---|
| Temperature Range | Operates In The Full Temperature Range From -40℃ To 125℃ |
| Accuracy Class | Full Temperature Range Measurement Accuracy ±3℃ |
| Rated Voltage | Compatible With 24V DC Vehicle-mounted Systems |
| Vibration Resistance Performance | Passed The 5-2000Hz Random Vibration Test |
| Overload Protection | Automatically Relieve Pressure When The Air Pressure Exceeds 1MPa |
|---|---|
| Main Airbag Module | Provide Seat Suspension And Shock Absorption Function |
| Structural Strength | The Overall Design Load-bearing Capacity Is ≥ 200kg |
| Manual Adjustment | Control Knobs Are Set On The Side Of The Seat. |
| Lumbar Support Airbag | Made Of Medical-grade TPU Material |
| Vibration Test | 10 - 2000Hz Sinusoidal Vibration |
|---|---|
| Locking Torque | Rated Locking Torque ≥ 800N·m |
| Lubrication System | Food - Grade Silicone Grease |
| Material Composition | Aluminum Alloy Housing |
| Sealed Structure | Double - Lip Seal Design |
| Packaging | Carton, Wooden Box, Custom Packaging |
|---|---|
| Accessory Type | Brake Accessories |
| Model | YF3501AD04-012 |
| Size | Standard Size |
| Quality | High Quality |
| Applicable Vehicle Model | Models Such As Jinlong And Yutong |
|---|---|
| Airbag Material | Natural Rubber + Nylon Fiber |
| Mounting Position | Front Axle/Rear Axle |
| Operating Temperature Range | -40℃ To +70℃ |
| OEM | 556-03-8015 |
| Heat Treatment Process | Austempering + Low-temperature Tempering |
|---|---|
| Fatigue Life | Bench Test: No Cracks After 500,000 Cycles |
| Torque Bearing | Rated Transmission Torque ≥ 8000N・m |
| Speed Range | Maximum Operating Speed 4000r/min |
| Interchangeability | Compliant With SAE J1280 Standard |
| Corrosion Resistance | Galvanized Or Cadmium Plated, Salt Spray 240 Hours + |
|---|---|
| Dynamic Balance Accuracy | G2.5 Level And Above To Ensure High-speed Stability |
| Assembly Gap | 0.05 - 0.15mm, Strict Control To Ensure Flexibility. |
| Lifespan | Under Normal Maintenance, Travel 200,000 Km + |
| Material | 20CrMnTi Alloy Steel, Carburized And Quenched. |