| Easy To Maintain | The Design Life Of The Brush Assembly Is ≥ 150,000 Kilometers |
|---|---|
| Protection Level | The Entire Machine Has IP54 Dust And Water Resistance Rating |
| Material Technology | The Shell Is Made Of ADC12 Aluminum Alloy By Die Casting. |
| Speed Characteristic | Idle Condition (800±50r/min) Output ≥ 60A |
| Efficiency Performance | Efficiency ≥ 85% At 75% Load |
| Lubrication System | Long - Acting Lithium - Based Lubricating Grease |
|---|---|
| Working Principle | Double Universal Joint Transmission |
| Sealed Structure | Double Lip Fluororubber Oil Seal |
| Connection Method | Integrally Forged Flange Plate |
| Itinerary Range | Telescopic Amount ±20mm |
| Adapt To | - Wide Temperature Range Environment From - 40℃ To 80℃ |
|---|---|
| Protection Level | IP65 Dustproof And Splash-proof |
| Brand Compatibility | Jinlong / Higer / Zhongtong |
| Safety Level | B+ Level Anti-theft Standard |
| Key Insertion And Extraction Lifespan | ≥100,000 Times |
| Structure | Double Gear Reduction System |
|---|---|
| Durability Upgrade | 100,000 Times Loop Test |
| Overload Protection | Automatic Reset System |
| Surface Treatment | Nano Ceramic Coating |
| Customized Service | Laser Engraving |
| Insulation Strength | No Breakdown Between Contact And Coil At AC 1000V For 1 Minute |
|---|---|
| Manufacturing Process | The Contact Points Are Welded Using Cold Pressure Welding. |
| Temperature Range | Operates In The Full Temperature Range From -40℃ To 125℃ |
| Fatigue Life | Mechanical Durability: 500,000 Times |
| Process Precision | Contact Gap Tolerance ±0.02mm |
| Installation Method | Threaded Connection M22×1.5 |
|---|---|
| Switch Type | Integrated Contactless Switch |
| Control The Temperature Range | 75 - 85℃ Can Be Customized |
| Service Life | ≥10000 Times |
| Insulation Resistance | >100MΩ |
| Sealing Parts | Adopt Flame-retardant Materials |
|---|---|
| Material | A380 Aluminum Alloy |
| Key Processes | 100% Full Inspection. |
| Gas Path Opening And Closing Time | <0.2 Seconds |
| Pass Through | Salt Spray Test |
| Core Functions | Brake Clearance Compensation |
|---|---|
| Advantages | Reduce Manual Maintenance |
| Compressed Air Consumption | Save Approximately 25% |
| Adopt | Riveting Process |
| Materials | High-strength Steel |
| Anti-fatigue Life | 200,000 - Time Torsional Fatigue Test |
|---|---|
| Steering Return To Neutral Time | <0.3 Seconds |
| High-precision Spline Connection | Adopt 79 Teeth |
| Transmission | Universal Joint Cross Head |
| Built - In | Telescopic Sleeve Mechanism |
| Apply To | - From The Frigid Zone Of - 40℃ To The High - Temperature Area Of 55℃ |
|---|---|
| Environmental Protection Design | The Materials Can Be 100% Recycled. |
| Lightweight | Aluminum Alloy Shell |
| Support | 1.2 - 1.5L Fuel Filling |
| Tensile Strength | ≥260MPa |