| Filter Material | Adopt A Double-layer Composite Filter Material Of Fiberglass + Resin-impregnated Cellulose |
|---|---|
| Environmental Adaptation | - From The Frigid Zone Of - 40℃ To The High - Temperature Area Of 55℃ |
| Environmentally Friendly Materials | Filter Materials Can Be 100% Recycled. |
| Deep Matching | Yuchai, Weichai Series |
| The Service Life Reaches | 20,000 Kilometers |
| Temperature Resistance Performance | Operating In A Wide Temperature Range From -40℃ To 125℃ |
|---|---|
| Speed Range | Operating Speed 600-6000r/min |
| Intelligent Adjustment | Built-in MCU Digital Regulator |
| Shell | Aluminum Alloy Die Casting |
| Electrical Performance | Rated Voltage 28V DC |
| Temperature Adaptation | Works In The Full Temperature Range From -40℃ To 120℃ |
|---|---|
| Material Composition | The Rod Body Is Forged From 40Cr Alloy Structural Steel. |
| Size Specifications | Center 137mm±0.5mm, Rod Diameter 20mm |
| Vibration Test | Pass The 10-2000Hz Random Vibration Test |
| Fatigue Life | After 200,000 Cycles Of Load Testing |
| Compatible Vehicle Models | Compatible With King Long XMQ6129, Higer KLQ6122, Foton AUV BJ6129, Etc. At The Same Time |
|---|---|
| Core Structure | Diaphragm-type Pressure Control Structure With Four Built-in Independent One-way Valves |
| Interface Specification | Air Inlet M22×1.5, All Four Air Outlets Are M16×1.5 |
| Protection Level | IP65 Dust, Oil And Water Resistance |
| Accessory Type | Four-circuit Protection Valve |
| Advantage | Durable, Energy-saving And Environmentally Friendly, Low Noise And High Efficiency |
|---|---|
| Applicable Scenario | Automobile Cooling, Industrial Ventilation |
| Accessory Type | Air Conditioning Accessories |
| International Certification | ISO 9001 .CE、RoHS |
| Product Model | VA33-BP93/VLL-65A |
| Packaging | Carton, Wooden Box, Custom Packaging,foam |
|---|---|
| Environmental Adaptability | Wide Temperature Range (-30℃ To +50℃) |
| Mute Optimization | Rubber Buffer Pad + Silencing Gear |
| Localized Customization | Multilingual Operation Instructions |
| Locking Force | 1200N Static Tension |
| Installation Location | Suitable For Side-mounted Luggage Compartment Doors, Rear-mounted Luggage Compartment Doors And Engine Compartment Doors |
|---|---|
| Humidity Adaptation | No Rust In An Environment With Humidity ≤ 95% RH |
| Impact Resistance Strength | Lock Body Compressive Strength ≥ 800MPa |
| Lock Cylinder Configuration | Using A Copper Pin Tumbler Lock Cylinder |
| Temperature Tolerance | Operating Temperature -40℃~+85℃ |
| Vane-type Hydraulic Pump | Efficient And Stable, With Low Noise And Long Service Life |
|---|---|
| Electric Drive | Powered By The Vehicle's High-voltage Battery |
| Motor Interface | High-voltage Waterproof Connector |
| Motor Speed | 3000-6000rpm |
| Original Factory Part Number | 2121-00041 |
| Maintenance Cycle | It Is Recommended To Check The Lubrication Status Every 20,000 Kilometers. |
|---|---|
| Installation Method | The Bearing Seat Is Connected To The Release Fork Via A Return Spring. |
| Main Material | The Outer Ring Is Made Of SUJ2 High-carbon Chromium Bearing Steel |
| Transmission Adaptation | Specially For Qijiang S6-90, S6-100, QJ805, QJ1506, Etc. |
| Interface Adaptation | Precisely Fits With The Groove Of The Clutch Fork |
| Compatible With Multiple Vehicle Models | Applicable To Buses, Public Transportation Vehicles, Tourist Coaches, Etc. |
|---|---|
| Quick Response | Adjust The Speed At The Millisecond Level |
| High Tightness | Special Process Treatment |
| Corrosion Resistance | Special Coating Treatment |
| Material | High-elasticity Rubber |