| Accessory Type | Bidirectional Acting Hydraulic Steering Damper |
|---|---|
| Condition Adaptation | -40℃~+80℃ Wide Temperature Operation |
| Compatible Scenarios | Suitable For 12-14 Meter Three-axle Buses |
| Stability Performance | Suppressing Steering Wheel Shimmy |
| Cylinder Bore Specification | φ45mm High-pressure Oil Cylinder |
| Rated Working Pressure | Adjustable According To Vehicle Type And Load |
|---|---|
| Rubber Composite Materials | Natural Rubber + Synthetic Rubber |
| Vehicle Model Adaptation | Commercial Vehicles |
| Fatigue Life | ≥300 Million Cycles |
| Installation Method | Bolt-fixed Type |
| Physical Properties | High Hardness |
|---|---|
| Material | Alloy Cast Iron |
| Temperature Resistance Range | -40℃~+150℃ |
| Dynamic Sealing Pressure | 0.2-0.5MPa |
| Salt Spray Test | 1000 Hours |
| Temperature Adaptation | Operating In The Full Temperature Range From -40℃ To 85℃ |
|---|---|
| Environmental Design | Dacromet Coating Does Not Contain Hexavalent Chromium |
| Material Composition | Adopt Q345B Low-alloy High-strength Steel |
| Shock Resistance | Can Withstand 100g Half-sine Wave Impact |
| Vibration Test | Pass The 5-2000Hz Random Vibration Test |
| Temperature Adaptation | Operates In The Full Temperature Range From -40℃ To 125℃ |
|---|---|
| Environmental Testing | -40℃ To 125℃ High And Low Temperature Cycle Test |
| Material Composition | The Main Body Is Made Of A356 Aluminum Alloy |
| Load Capacity | Static Torque Bearing Capacity ≥ 850N・m |
| Vibration-resistant Design | Built-in Rubber Shock-absorbing Bracket |
| Temperature Range Adaptation | Operates In The Full Temperature Range From -40℃ To 120℃ |
|---|---|
| Steel Plate Adaptation | Designed Specifically For 10-12 Leaf Spring Plates |
| Fatigue Life | After 500,000 Alternating Load Tests |
| Department Structure | Integrally Forged U-shaped Head |
| Fixing Method | Matching 12-level Hexagon Nut |
| Fatigue Life | After 100,000 Compression Cycles, The Rebound Attenuation Is ≤ 3% |
|---|---|
| Medium Resistance | Resistant To Immersion In Engine Oil And Coolant For 168 Hours |
| Temperature Range | Operating In The Full Temperature Range From -40℃ To 125℃ |
| Friction Material | German Raybestos Composite Fiber Material |
| Shock-absorbing Spring | Oil-quenched And Tempered Spring Steel Wire |
| Quick-release Structure | The Filter Element Adopts A Clip-on Installation, And The Replacement Time Is ≤ 5 Minutes |
|---|---|
| Long-lasting And Durable | The Overall Simulated Service Life Of The Set Of Racks Is ≥ 30,000 Kilometers |
| Precise Adaptation | Designed Specifically For Yutong E12, CL6, And T7 New Energy Buses |
| Packaging Protection | Vacuum-sealed Packaging + Moisture-proof Buffer Box |
| Original Factory Traceability | Each Set Comes With A Unique QR Code |
| Accessory Type | Float-type Liquid Level Detection Sensor |
|---|---|
| Installation Specifications | M16×1.5 Standard Mounting Thread |
| Sealing Process | Single-loop O-ring Seal |
| Output Signal | Switch Signal |
| Original Factory Code | 3825-00009 |
| Quality Commitment | Inspection One By One, With A Pass Rate Of 100% (supporting Attached Inspection Reports) |
|---|---|
| Packaging | Carton, Wooden Box, Custom Packaging |
| Model | HS-030-702,8101-06172 |
| Accessory Type | New Energy Vehicle |
| International Certification | CE/ISO 9001/DOT |