| Temperature Range Adaptation | Operates In The Full Temperature Range From -40℃ To 120℃ |
|---|---|
| Steel Plate Adaptation | Designed Specifically For 10-12 Leaf Spring Plates |
| Fatigue Life | After 500,000 Alternating Load Tests |
| Department Structure | Integrally Forged U-shaped Head |
| Fixing Method | Matching 12-level Hexagon Nut |
| Fatigue Life | After 100,000 Compression Cycles, The Rebound Attenuation Is ≤ 3% |
|---|---|
| Medium Resistance | Resistant To Immersion In Engine Oil And Coolant For 168 Hours |
| Temperature Range | Operating In The Full Temperature Range From -40℃ To 125℃ |
| Friction Material | German Raybestos Composite Fiber Material |
| Shock-absorbing Spring | Oil-quenched And Tempered Spring Steel Wire |
| Surface Protection | Electrophoretic Primer + Polyester Topcoat Double-layer Coating |
|---|---|
| Temperature Range | Operates In The Full Temperature Range From -40℃ To 85℃ |
| Bracket Design | Matching Q235 Steel Plate Stamping Bracket |
| Core Parameters | Capacity 5L, Outer Diameter Φ205mm |
| Volume Accuracy | Actual Volume Deviation ≤ ±3% |
| Dustproof And Waterproof | Prevent Dust, Oil Stains, And Liquids From Seeping Into The Gear Shift Mechanism |
|---|---|
| Full Product Name | Gearshift Dust Cover Three Flexible Shaft Assembly |
| Maintenance Convenience | The Dust Cover Can Be Replaced Separately. |
| Protection Level | IP54 Dustproof And Splash-proof |
| Service Life | ≥5 Years Or 1,000,000 Kilometers |
| Core Structure | Dual-coil Electromagnetic Control + Friction Plate Clutch Mechanism |
|---|---|
| Material Composition | High-strength Cast Iron Shell + Aluminum Alloy Heat Sink Plate |
| Accessory Type | Rear-mounted Three-speed Electromagnetic Fan Clutch |
| Torque Output | Maximum Transmitted Torque ≥ 180N・m |
| Suitable Shaft Diameter | Standard 38mm/42mm Two Specifications |
| Light Source Type | Automotive-grade High-luminous-efficiency LED Chips |
|---|---|
| Circuit Compatibility | Directly Connect To The Original Vehicle's CAN Bus |
| Accessory Type | Integrated LED Combination Headlight |
| Durability Performance | LED Chip Design Life ≥ 50,000 Hours |
| Vibration Resistance Characteristics | Passed The 10g Vibration Test |
| Accessory Type | Float-type Liquid Level Detection Sensor |
|---|---|
| Installation Specifications | M16×1.5 Standard Mounting Thread |
| Sealing Process | Single-loop O-ring Seal |
| Output Signal | Switch Signal |
| Original Factory Code | 3825-00009 |
| Operating Temperature | Stable Operation In A Wide Temperature Range Of -40℃ To +85℃ |
|---|---|
| Durable And Reliable Characteristics | The Designed Service Life Of The LED Bead Is ≥3000 Hours. |
| Wiring Specifications | Original Factory Special Waterproof Connector |
| Core Structure | Integrated Fully Sealed Lamp Body Structure |
| Protection Grade | IP67 Dustproof And Waterproof |
| Quality Commitment | Inspection One By One, With A Pass Rate Of 100% (supporting Attached Inspection Reports) |
|---|---|
| Packaging | Carton, Wooden Box, Custom Packaging |
| Model | HS-030-702,8101-06172 |
| Accessory Type | New Energy Vehicle |
| International Certification | CE/ISO 9001/DOT |
| Corrosion Resistance | Galvanized Or Cadmium Plated, Salt Spray 240 Hours + |
|---|---|
| Dynamic Balance Accuracy | G2.5 Level And Above To Ensure High-speed Stability |
| Assembly Gap | 0.05 - 0.15mm, Strict Control To Ensure Flexibility. |
| Lifespan | Under Normal Maintenance, Travel 200,000 Km + |
| Material | 20CrMnTi Alloy Steel, Carburized And Quenched. |