| Install | Direct Replacement |
|---|---|
| Structure | Heteromorphic |
| Applicable | Passenger Bus |
| Type | Universal Joint |
| Characteristics | Wear-resistant |
| Functional Advantages | Waterproof And Dustproof Sealing Design |
|---|---|
| Physical Properties | High Compressive Strength |
| Electrical Performance | Excellent Electrical Conductivity |
| Environmental Adaptability | High Temperature Resistance |
| Installation And Maintenance | Quick-install Snap-fit Design |
| Shell | ADC6 Aluminum Alloy |
|---|---|
| Built-in | Heating Module |
| Lifespan | Long-life Design |
| Wide Temperature Operating Range | -40℃~+85℃ |
| Heat | Intelligent Temperature Control |
| Motor Configuration | 24V Permanent Magnet Synchronous Motor |
|---|---|
| Air Volume And Air Pressure | Rated Air Volume 2500m³/h |
| Noise Control | No-load Noise ≤ 68dB (A) |
| Protection Level | IP55 Dustproof And Waterproof |
| Impeller Material | High-strength Aluminum Alloy Die-cast Impeller |
| Working Condition Adaptation | Designed Specifically For The High-frequency Opening And Closing Of The Rear Cabin Door |
|---|---|
| Vibration-proof Structure | Internally Potted With Epoxy Resin |
| Protection Mechanism | Dual Overcurrent Protection |
| Service Life | ≥50000 Hours |
| Rated Current | ≤100mA |
| Cold Adaptation | The Increase In Separation Force During Cold Start At -30℃ Is ≤ 15% |
|---|---|
| Environmental Adaptation | -40℃ To 120℃ Temperature Cycling 200 Times Without Cracks |
| Heart Structure | Flatness Of The Pressure Plate Working Surface ≤ 0.05mm/m |
| Thermal Stability | The Friction Coefficient Retention Rate At 350℃ Is ≥ 85% |
| Spring Layout | 36 Springs Are Symmetrically Distributed In 6 Groups |
| The Light Intensity Meets The Standard. | The Luminous Intensity Of The Reference Axis Is ≥ 2cd |
|---|---|
| Luminous Efficiency | Photoelectric Conversion Efficiency ≥ 85lm/W |
| Light Source Type | Using 5730 Packaged Red LED Lamp Beads |
| Response Speed | LED Lighting Response Time ≤ 10ms |
| Light-transmitting Cover Design | High Light Transmittance PC Mask |
| Spring Material | 60Si2MnA Alloy Steel |
|---|---|
| Diaphragm Fatigue Life | 500,000 Loops Without Damage |
| Diaphragm Material | Nitrile Rubber Composite Fabric |
| Certification Standards | ISO 9001/GB 12676 |
| Environmental Temperature Range | -40℃~+85℃ |
| Cycle Life | 50,000 - 100,000 Repetitions Of Opening And Closing |
|---|---|
| Temperature Range | - From -40℃ To 85℃ |
| Itinerary | 10mm - 20mm |
| Good Compatibility | Various Buses |
| Shell | Metal/Plastic |
| Alarm Methods | Acoustic And Optical Alarm |
|---|---|
| Installation Method | Threaded Connection |
| Operating Temperature | -45℃ - +90℃ |
| Barometric Pressure Measurement Range | 0 - 1.2MPa |
| Service Life | ≥8 Years |